When you have completed the Dolby Pro Logic setup, you are ready to enjoy Home Cinema sound.
Dolby Surround
This setting is for a full Dolby Surround Pro Logic mode.
Dolby 3 Stereo
Use this setting when full surround is not required, but a wide stereo sound is
DOLBY PRO LOGIC
Important!
1 For the best Dolby Pro Logic sound, |
switch on DPL with DSC set to |
“Classic” . |
English
•Press DPL (PRO LOGIC) repeatedly to select and cycle through the various sound modes.
à
Ç á
DPL
L BALANCE R
•Press DPL to select the Dolby Surround mode.
™The message
"DOLBY C
SURROUND" | L | R |
desired. It only requires the left, right and center speakers.
•Press DPL to select the Dolby 3 Stereo mode.
™ The message
2 | Dolby Pro Logic mode will |
| automatically switch to normal |
| Stereo mode when headphones are |
| connected. |
3 | Switch to normal stereo mode when |
Dolby Surround ™ Center
Phantom ™ Dolby 3 Stereo ™
Stereo ™ Dolby Surround …
™The Dolby Pro Logic display panel will light up with the selection.
will be | PRO LOGIC |
S | S |
displayed. |
|
™The DPL display panel will light up.
Dolby Center Phantom
"DOLBY 3 |
| C | |
STEREO" will | L | R | |
be displayed. | |||
| PRO LOGIC | ||
™ The DPL display | S | S | |
|
| ||
panel will light |
|
| |
up. |
|
|
you record on a tape. |
9 |
This setting is for use without the center speaker. It redistributes the center speaker sound to the left and right speakers, providing conventional stereo across the front.
•Press DPL to select the Dolby Pro Logic Center Phantom mode.
™The message
"CENTER C
PHANTOM" | L | R |
will be |
| PRO LOGIC |
|
| |
displayed. | S | S |
|
|
™The DPL display panel will light up.
Normal Stereo
This setting is for normal stereo sound without Dolby Pro Logic. It only requires the left and right speakers.
•Press DPL to select the Stereo mode.
™The message
"STEREO"C
will be | L | R |
displayed. |
| PRO LOGIC |
™ The DPL display | S | S |
|
| |
panel will light |
|
|
up. |
|
|
6/8/01, 10:13 AM
9