Sony MZ-E800 service manual Reset the error display code, Description of Indication History

• Description of Indication History

History code number		Description
1st	0	The first error
1st	1	Displays “00”
1st	2	Displays “00”
N	0	The last error
N	1	Displays “00”
N	2	Displays “00”
N-1	0	One error before the last.
N-1	1	Displays “00”
N-1	2	Displays “00”
N-2	0	Two errors before the last.
N-2	1	Displays “00”
N-2	2	Displays “00”
R		Total recording time (Displays “0000” in this set)

• Description of Error Indication Codes

Problem	Indication code	Meaning of code	Description
No error	00	No error	Normal condition
	01	Illegal access target address	Attempt to access an abnormal address
		was specified
Servo error	02	High temperture	High temperture
	03	Focus error	Forcus could not be applied
	04	Spindle error	Abnormal lotation of disc
Power error	22	Low battery	Momentary interruption detected

Reset the error display code

After servicing, reset the error display code.

1.Setting the test mode (see page 12).

2.Press the [DISPLAY] key activates the self-diagnosis display mode.

3.To reset the error display code, press the X key (2 times) when the code is displayed (except “R 0000”). (All the data on the 1st, N, N-1, and N-2 will be reset)

– 15 –