•IC801 CXR701080-016GA (SYSTEM CONTROLLER)
Pin No. | Pin Name | I/O | Description | |
|
|
|
| |
1 | VLCD | O | Not used (open) | |
|
|
|
| |
2 | OFTRK | I | Off track signal input from the CXD2661GA (IC601) | |
|
|
|
| |
3, 4 | NC | I | Not used (open) | |
|
|
|
| |
5 | NC | O | Not used (open) | |
6 to 9 | COM0 to COM3 | O | Common drive signal output to the liquid display module (LCD901) | |
10 | NC | O | Not used (open) | |
|
|
|
| |
11 | SI0 | I | Serial data input from the CXD2661GA (IC601) | |
|
|
|
| |
12 | SO0 | O | Serial data output to the CXD2661GA (IC601) | |
|
|
|
| |
13 | SCK0 | O | Serial clock signal output to the CXD2661GA (IC601) and EEPROM (IC802) | |
|
|
|
| |
14 | NC | I | Not used (open) | |
15 | VSS | — | Ground terminal | |
16 | VDD | — | Power supply terminal (+2.4V) | |
|
|
|
| |
17 | NC | O | Not used (open) | |
|
|
|
| |
18 | BEEP | O | Beep sound control signal output to the headphone amp (IC301) | |
|
|
|
| |
19 | RMC DTCK | I/O | TSB serial communication data input/output terminal for remote commander with headphone | |
|
|
|
| |
20, 21 | NC | O | Not used (open) | |
22 | MUTE | O | Analog muting on/off control signal output to the headphone amp (IC301) “H”: muting on | |
23 | XHP STBY | O | Standby on/off control signal output to the headphone amp (IC301) | |
“L”: standby mode, “H”: amp on | ||||
|
|
| ||
|
|
|
| |
24 | CLV U | O | Spindle servo (U) drive signal input from the XC111256FTA (IC551) | |
|
|
|
| |
25 | CLV V | O | Spindle servo (V) drive signal input from the XC111256FTA (IC551) | |
|
|
|
| |
26 | CLV W | O | Spindle servo (W) drive signal input from the XC111256FTA (IC551) | |
|
|
|
| |
27 | XRST MTR | O | Reset signal output to the XC111256FTA (IC551) “L”: reset | |
DRV | ||||
|
|
| ||
|
|
|
| |
28 | XLAT | O | Serial data latch pulse signal output to the CXD2661GA (IC601) | |
29 | XCS DSP | O | Chip select signal output to the CXD2661GA (IC601) | |
|
|
|
| |
30 to 32 | NC | O | Not used (open) | |
|
|
|
| |
33 | SENSE | I | Internal status (SENSE) input from the CXD2661GA (IC601) | |
|
|
|
| |
34 | TSB SLVE | I | Not used (fixed at “H”) | |
|
|
|
| |
35 | SLD MON 1 | I | Sled servo timing signal input from the CXD2661GA (IC601) | |
36 | PD S0 | O | PD IC mode switching signal output to the optical | |
37 | NC | O | Not used (open) | |
|
|
|
| |
38 | PD S1 | O | PD IC mode switching signal output to the optical | |
|
|
|
| |
39 | RMC WK CTL | O | Starting signal output to the remote commander with headphone | |
|
|
|
| |
40 | XSLEEP | O | System sleep control signal output terminal “H”: sleep on | |
|
|
|
| |
41 | TSB EDGE | I | Not used (fixed at “L”) | |
42 | NC | O | Not used (open) | |
43 | XRST | I | System reset signal input from the reset signal generator (IC905) “L”: reset | |
For several hundreds msec. after the power supply rises, “L” is input, then it changes to “H” | ||||
|
|
| ||
|
|
|
| |
44 | VSS | — | Ground terminal | |
|
|
|
| |
45 | XTAL | O | Main system clock output terminal (16.9344 MHz) | |
|
|
|
| |
46 | EXTAL | I | Main system clock input terminal (16.9344 MHz) | |
|
|
|
| |
47 | VDD | — | Power supply terminal (+2.4V) | |
48 | NC | I/O | Not used (open) | |
49 | SPDL START | O | Spindle servo start switching signal output terminal | |
SW | ||||
|
|
| ||
|
|
|
|
– 44 –