v
Upgrading a Topspin 270 with Element Manager | 54 |
Upgrading an Individual Controller Card | 56 |
Upgrading a Controller Card with the CLI | 57 |
Upgrading Individual Node Cards | 59 |
Upgrading a Node Card with Element Manager | 60 |
5: Monitoring the Topspin 270 System | 65 |
Interpreting the Front Panel LEDs | 65 |
66 | |
Power Supply LEDs | 67 |
Fan LEDs | 69 |
Fabric Controller LEDs | 70 |
Interpreting the Back Panel LEDs | 71 |
Management Interface Module LEDs | 71 |
Chassis ID LEDs | 74 |
LIM Status LEDs | 75 |
InfiniBand Port LEDs | 75 |
Monitoring the System with Chassis Manager | 76 |
Monitor the Device | 76 |
Monitor the Cards | 79 |
Monitor the InfiniBand Ports | 80 |
Monitor the Power Supplies | 81 |
Monitor the Fans | 82 |
Monitor the Temperature | 83 |
Monitoring the System with Element Manager | 84 |
Interpreting the Summary Tab | 84 |
Interpreting the Power Supplies Tab | 85 |
Interpreting the Fans Tab | 85 |
Interpreting the Sensors Tab | 85 |
Monitor the System With the CLI | 86 |
6: Hardware Diagnostic Tests | 89 |
About Diagnostic Tests | 89 |
LED Tests | 89 |
Self Tests | 89 |
Run Card Tests | 90 |
Run a Card | 90 |
Run Chassis Tests | 92 |
Run a Chassis Standard Test | 93 |
Run Fan Tests | 94 |
Run a | 94 |
Run Power Supply Tests | 96 |
Run a LED Test on the Power Supply | 96 |
Run a | 97 |
Displaying Hardware Errors | 99 |