59
5.Activate the image. After downloading the image file to the chassis controller, it must be installed to become active. The install command installs the specified image file into the system.
a. In the
Example
*****************operation completed successfully
6.Specify the new boot image to be used.
a.Find the name of your new system image by entering the dir image command. Copy the name of the new image.
b.Enter
Example
7.Reset the individual Controller card without rebooting the whole chassis.
Example
Upgrading Individual Node Cards
Upgrading a Node Card with the CLI
For the commands needed to upgrade a node card using the CLI, refer to the CLI Reference Guide.