74
Table
Color | State | Indication |
Green over Yellow | off | No fan module installed, or LED failure. |
|
|
|
Green | solid on | Power supply is running with no errors detected. |
|
|
|
Green | off | No power to the Power supply, LED failure, or yellow LED is |
|
| On. |
|
|
|
Yellow | solid on | Failure of the Power Supply. Operator attention required. |
|
| The “!” label indicates a failure. |
|
|
|
Master Management Connection Status LED
The Master Management Connection Status LED is a single LED that indicates whether that particular Management Interface module is connected to the system's active master controller.
Refer to Figure
Table
Color | State | Indication |
Green | off | Management module is not connected to the active master |
|
| controller, or is connected to the system's standby master |
|
| controller. |
|
|
|
Green | solid on | Management module is connected to the system's active master |
|
| controller. |
Ethernet Management Port RJ-45 connector LEDs
Refer to Figure
Table
Location | State | Indication |
Left port LED | off | Port is not connected or logical link is down. |
|
|
|
Left port LED | on | Port is connected and logical link is up. |
|
|
|
Right port LED | off | No traffic is moving on the Ethernet Management port link. |
|
| Logical link may or may not be Up. |
|
|
|
Right port LED | on | Traffic is moving on the Ethernet Management port link. |
|
|
|
Chassis ID LEDs
Figure 5-7: Chassis ID LEDs
The Chassis ID Status LED indicates the status of this module.