Internal Components

Figure 9: Inside View of the B200 M3 Blade Server

Hard drive bays

Internal USB connector

Cisco UCS-USBFLSH-S-4GB= is recommended, but if another USB drive will be used it must be no wider than .8 inches, and no more than 1.345 inches long in order tp provide needed clearances to install or remove the USB drive.

3	Battery	4	CPU and heat sink
5	DIMM slots	6	Diagnostic button
7	Modular LOM (shown installed)	8	Adapter card connector (Adapter not shown installed)

Diagnostics Button and LEDs

At blade start-up, POST diagnostics test the CPUs, DIMMs, HDDs, and adapter cards, and any failure notifications are sent to UCS Manager. You can view these notifications in the System Error Log or in the output of the show tech-supportcommand. If errors are found, an amber diagnostic LED also lights up next to the failed component. During run time, the blade BIOS, component drivers, and OS all monitor for hardware faults and will light up the amber diagnostic LED for a component if an uncorrectable error or correctable errors (such as a host ECC error) over the allowed threshold occur.

LED states are saved, and if you remove the blade from the chassis the LED values will persist for up to 10 minutes. Pressing the LED diagnostics button on the motherboard causes the LEDs that currently show a component fault to light for up to 30 seconds for easier component identification. LED fault values are reset when the blade is reinserted into the chassis and booted, and the process begins from its start.

If DIMM insertion errors are detected, they may cause the blade discovery to fail and errors will be reported in the server POST information, which is viewable using the UCS Manager GUI or CLI. UCS blade servers require specific rules to be followed when

UCSSPENTVB200M3 specifications

Cisco Systems has long been a stalwart in the networking and telecommunications industry, offering a comprehensive range of products designed to enhance connectivity and communication for businesses around the globe. One such standout product is the Cisco UCSSPENTVB200M3. This model is part of Cisco's Unified Computing System (UCS), specifically tailored for environments requiring reliable and efficient data center solutions.

The Cisco UCSSPENTVB200M3 is characterized by its robust architecture that seamlessly integrates computing, networking, and storage resources in a single platform. This convergence is a significant advantage, as it simplifies management and reduces deployment costs. One of the primary features of this model is its scalability, allowing organizations to easily adjust their resources as their needs evolve. Whether a company is expanding, scaling down, or optimizing its operations, the UCS system provides the flexibility needed to maintain operational efficiency.

In terms of technology, the UCSSPENTVB200M3 employs Intel's Xeon processors, which are known for their powerful performance and energy efficiency. This choice of hardware ensures that the system can handle intense workloads and provides the computational power necessary for data-intensive applications. Additionally, the system supports advanced virtualization technologies that enhance its capabilities, enabling multiple operating systems and applications to run on a single physical server, which maximizes resource utilization.

Another noteworthy characteristic of the UCSSPENTVB200M3 is its advanced security features. As data breaches become increasingly common, Cisco has prioritized the protection of information within its products. This model includes integrated security features that safeguard sensitive data and ensure compliance with industry regulations.

Connectivity is also a critical component of this system, featuring multiple network interfaces that support high-speed communication. This is essential for businesses that rely on real-time data transfer and cloud-based services. Furthermore, the UCS Manager interface simplifies the management of server resources, allowing administrators to automate tasks and maintain optimal performance with ease.

Overall, the Cisco UCSSPENTVB200M3 is an exceptional solution for modern data centers, offering a combination of performance, scalability, security, and ease of management. This product stands as a testament to Cisco's commitment to innovation and its ability to meet the demands of today's dynamic business landscape. With organizations increasingly relying on technology for growth, systems like the UCSSPENTVB200M3 are vital for driving efficiency and competitiveness in the digital age.