Cisco Systems UCSSPENTVB200M3 Secure Digital SD Card Access, Removing a Blade Server Cover

Page 9

Step 2 Open the ejector lever in the front of the blade server.

Step 3 Gently slide the blade into the opening until you cannot push it any farther.

Step 4 Press the ejector lever so that it catches the edge of the chassis and presses the blade server all the way in.

Step 5 Tighten the captive screw on the front of the blade to no more than 3 in-lbs. Tightening with bare fingers only is unlikely to lead to stripped or damaged captive screws.

Step 6 Power on the server. UCS Manager automatically reacknowledges, reassociates, and recommissions the server, provided any hardware changes are allowed by the service profile.

Secure Digital (SD) Card Access

SD card slots are provided for future usage. Their use is not supported at product release. They will require a future software update to be used.

Figure 6: SD Card Slot Locations

Removing a Blade Server Cover

Replacing the cover is the reverse of removing the cover. To open a blade server, follow these steps:

9

Image 9
Contents Cisco UCS B200 M3 Blade Server Installation and Service Note LEDs Cisco UCS B200 M3 Blade ServerColor Description LEDConnectors Hard Drive ReplacementButtons RAID Considerations Removing a Blade Server Hard DriveInstalling a Blade Server Hard Drive Blade Server Removal and InstallationRemoving a Blade Server Powering Off Blade Servers Using the Power ButtonPositioning a Blade Server in the Chassis Installing a Half-width Blade ServerRemoving a Blade Server Cover Secure Digital SD Card AccessOpening a Cisco UCS B200 M3 Blade Server Cisco UCS B200 M3 Air Baffles Air BafflesInternal Components Diagnostics Button and LEDsWorking Inside the Blade Server Installing a Motherboard Cmos BatteryLocation of the Motherboard Cmos Battery CPU and Heatsink ReplacementRemoving a CPU and Heat Sink Step Removing the Heat Sink and Accessing the CPU SocketInstalling a New CPU and Heat Sink Protective Cap Removal Lift the tool and CPU straight up off of the pedestal Using the CPU Pick and Place Tool to Insert the CPU Replacing the Heat Sink B200 M3 Shown Memory and Performance Installing MemorySupported DIMMs Installing DIMMs in the Blade ServerDIMMs and Channels Memory ArrangementPhysical Representation of DIMMs and Channels Figure below shows a logical view of the DIMMs and channels DIMMs per CPU CPU 1 installed slots CPU 2 installed slots Memory PerformanceMemory Mirroring and RAS Installing an mLOM Installing a Modular LOMInstalling an Adapter Card Enabling a Trusted Platform Module Installing an Adapter CardServer Troubleshooting Specification ValueRelated Documentation Obtaining Documentation and Submitting a Service Request Page USA

UCSSPENTVB200M3 specifications

Cisco Systems has long been a stalwart in the networking and telecommunications industry, offering a comprehensive range of products designed to enhance connectivity and communication for businesses around the globe. One such standout product is the Cisco UCSSPENTVB200M3. This model is part of Cisco's Unified Computing System (UCS), specifically tailored for environments requiring reliable and efficient data center solutions.

The Cisco UCSSPENTVB200M3 is characterized by its robust architecture that seamlessly integrates computing, networking, and storage resources in a single platform. This convergence is a significant advantage, as it simplifies management and reduces deployment costs. One of the primary features of this model is its scalability, allowing organizations to easily adjust their resources as their needs evolve. Whether a company is expanding, scaling down, or optimizing its operations, the UCS system provides the flexibility needed to maintain operational efficiency.

In terms of technology, the UCSSPENTVB200M3 employs Intel's Xeon processors, which are known for their powerful performance and energy efficiency. This choice of hardware ensures that the system can handle intense workloads and provides the computational power necessary for data-intensive applications. Additionally, the system supports advanced virtualization technologies that enhance its capabilities, enabling multiple operating systems and applications to run on a single physical server, which maximizes resource utilization.

Another noteworthy characteristic of the UCSSPENTVB200M3 is its advanced security features. As data breaches become increasingly common, Cisco has prioritized the protection of information within its products. This model includes integrated security features that safeguard sensitive data and ensure compliance with industry regulations.

Connectivity is also a critical component of this system, featuring multiple network interfaces that support high-speed communication. This is essential for businesses that rely on real-time data transfer and cloud-based services. Furthermore, the UCS Manager interface simplifies the management of server resources, allowing administrators to automate tasks and maintain optimal performance with ease.

Overall, the Cisco UCSSPENTVB200M3 is an exceptional solution for modern data centers, offering a combination of performance, scalability, security, and ease of management. This product stands as a testament to Cisco's commitment to innovation and its ability to meet the demands of today's dynamic business landscape. With organizations increasingly relying on technology for growth, systems like the UCSSPENTVB200M3 are vital for driving efficiency and competitiveness in the digital age.