Cisco Systems UCSSPENTVB200M3 specifications Powering Off Blade Servers Using the Power Button

Page 7

Powering Off Blade Servers Using the Power Button

Tip You can also shut the server down remotely using Cisco UCS Manager. For details, see the Configuration Guide for the version of Cisco UCS Manager that you are using. The configuration guides are available at the following URL: http://www.cisco.com/en/US/products/ps10281/products_installation_and_ configuration_guides_list.html

Procedure

Step 1 For each server in the chassis that you want to power off, check the color of the Power Status LED.

•Green indicates that the server is running and must be shut down before it can be safely powered off. Go to Step 2.

•Amber indicates that the server is already in standby mode and can be safely powered off. Go to Step 3.

Step 2 Press and release the Power button, then wait until the Power Status LED changes to amber. The operating system performs a graceful shutdown and the server goes to standby mode.

Caution To avoid data loss or damage to your operating system, you should always invoke a graceful shutdown of the operating system.

Step 3 (Optional) If you are shutting down all blade servers in a chassis, disconnect the power cords from the chassis to completely power off the servers.

Step 4 Remove the appropriate servers from the chassis.

Removing a Blade Server

Using UCS Manager, decommission the server before physically removing the server. To remove a blade server from the chassis, follow these steps:

Procedure

Step 1 Loosen the captive screw on the front of the blade.

Step 2 Remove the blade from the chassis by pulling the ejector lever on the blade until it unseats the blade server.

Step 3 Slide the blade part of the way out of the chassis, and place your other hand under the blade to support its weight.

Step 4 Once removed, place the blade on an antistatic mat or antistatic foam if you are not immediately reinstalling it into another slot.

Step 5 If the slot is to remain empty, install a blank faceplate (N20-CBLKB1) to keep dust out of the chassis.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Cisco UCS B200 M3 Blade Server Installation and Service Note LEDs Cisco UCS B200 M3 Blade ServerColor Description LEDHard Drive Replacement ConnectorsButtons RAID Considerations Removing a Blade Server Hard DriveInstalling a Blade Server Hard Drive Blade Server Removal and InstallationRemoving a Blade Server Powering Off Blade Servers Using the Power ButtonPositioning a Blade Server in the Chassis Installing a Half-width Blade ServerRemoving a Blade Server Cover Secure Digital SD Card AccessOpening a Cisco UCS B200 M3 Blade Server Cisco UCS B200 M3 Air Baffles Air BafflesInternal Components Diagnostics Button and LEDsWorking Inside the Blade Server Installing a Motherboard Cmos BatteryLocation of the Motherboard Cmos Battery CPU and Heatsink ReplacementRemoving a CPU and Heat Sink Step Removing the Heat Sink and Accessing the CPU SocketInstalling a New CPU and Heat Sink Protective Cap Removal Lift the tool and CPU straight up off of the pedestal Using the CPU Pick and Place Tool to Insert the CPU Replacing the Heat Sink B200 M3 Shown Memory and Performance Installing MemorySupported DIMMs Installing DIMMs in the Blade ServerDIMMs and Channels Memory ArrangementPhysical Representation of DIMMs and Channels Figure below shows a logical view of the DIMMs and channels Memory Performance DIMMs per CPU CPU 1 installed slots CPU 2 installed slotsMemory Mirroring and RAS Installing an mLOM Installing a Modular LOMInstalling an Adapter Card Enabling a Trusted Platform Module Installing an Adapter CardSpecification Value Server TroubleshootingRelated Documentation Obtaining Documentation and Submitting a Service Request Page USA

UCSSPENTVB200M3 specifications

Cisco Systems has long been a stalwart in the networking and telecommunications industry, offering a comprehensive range of products designed to enhance connectivity and communication for businesses around the globe. One such standout product is the Cisco UCSSPENTVB200M3. This model is part of Cisco's Unified Computing System (UCS), specifically tailored for environments requiring reliable and efficient data center solutions.

The Cisco UCSSPENTVB200M3 is characterized by its robust architecture that seamlessly integrates computing, networking, and storage resources in a single platform. This convergence is a significant advantage, as it simplifies management and reduces deployment costs. One of the primary features of this model is its scalability, allowing organizations to easily adjust their resources as their needs evolve. Whether a company is expanding, scaling down, or optimizing its operations, the UCS system provides the flexibility needed to maintain operational efficiency.

In terms of technology, the UCSSPENTVB200M3 employs Intel's Xeon processors, which are known for their powerful performance and energy efficiency. This choice of hardware ensures that the system can handle intense workloads and provides the computational power necessary for data-intensive applications. Additionally, the system supports advanced virtualization technologies that enhance its capabilities, enabling multiple operating systems and applications to run on a single physical server, which maximizes resource utilization.

Another noteworthy characteristic of the UCSSPENTVB200M3 is its advanced security features. As data breaches become increasingly common, Cisco has prioritized the protection of information within its products. This model includes integrated security features that safeguard sensitive data and ensure compliance with industry regulations.

Connectivity is also a critical component of this system, featuring multiple network interfaces that support high-speed communication. This is essential for businesses that rely on real-time data transfer and cloud-based services. Furthermore, the UCS Manager interface simplifies the management of server resources, allowing administrators to automate tasks and maintain optimal performance with ease.

Overall, the Cisco UCSSPENTVB200M3 is an exceptional solution for modern data centers, offering a combination of performance, scalability, security, and ease of management. This product stands as a testament to Cisco's commitment to innovation and its ability to meet the demands of today's dynamic business landscape. With organizations increasingly relying on technology for growth, systems like the UCSSPENTVB200M3 are vital for driving efficiency and competitiveness in the digital age.
Top Page Image Contents