Cisco Systems UCSSPENTVB200M3 specifications Protective Cap Removal

Page 18

Procedure

Step 1 (Optional) If you are installing a CPU in a socket that had been shipped empty, there will be a protective cap intended to prevent bent or touched contact pins. The pick and pull cap tool provided can be used in a manner similar to a pair of tweezers. Grasp the protective cap and pivot as shown.

Figure 13: Protective Cap Removal

Step 2 Release the catch on the pick and place tool by pressing the handle/button.

Step 3 Remove the new CPU from the packaging, and load it into the pick and place tool as follows:

a)Confirm that the pedestal is set up correctly for your processor. The pedestal ships configured with the markings “LGA2011-R0”facing upward, and this is the correct orientation.

b)Place the CPU on the pedestal. The CPU corners should fit snugly at the pedestal corners and the notches should meet the pegs perfectly.

c)Place the CPU pick and place tool on the CPU pedestal aligned with the A1 arrow pointing to the A1 registration mark on the pedestal.

d)Press the button/handle on the tool to grasp the CPU.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Cisco UCS B200 M3 Blade Server Installation and Service Note Cisco UCS B200 M3 Blade Server LEDsLED Color DescriptionConnectors Hard Drive ReplacementButtons Removing a Blade Server Hard Drive RAID ConsiderationsBlade Server Removal and Installation Installing a Blade Server Hard DrivePowering Off Blade Servers Using the Power Button Removing a Blade ServerInstalling a Half-width Blade Server Positioning a Blade Server in the ChassisSecure Digital SD Card Access Removing a Blade Server CoverOpening a Cisco UCS B200 M3 Blade Server Air Baffles Cisco UCS B200 M3 Air BafflesDiagnostics Button and LEDs Internal ComponentsInstalling a Motherboard Cmos Battery Working Inside the Blade ServerCPU and Heatsink Replacement Location of the Motherboard Cmos BatteryRemoving a CPU and Heat Sink Removing the Heat Sink and Accessing the CPU Socket StepInstalling a New CPU and Heat Sink Protective Cap Removal Lift the tool and CPU straight up off of the pedestal Using the CPU Pick and Place Tool to Insert the CPU Replacing the Heat Sink B200 M3 Shown Installing Memory Memory and PerformanceInstalling DIMMs in the Blade Server Supported DIMMsMemory Arrangement DIMMs and ChannelsPhysical Representation of DIMMs and Channels Figure below shows a logical view of the DIMMs and channels DIMMs per CPU CPU 1 installed slots CPU 2 installed slots Memory PerformanceMemory Mirroring and RAS Installing a Modular LOM Installing an mLOMInstalling an Adapter Card Installing an Adapter Card Enabling a Trusted Platform ModuleServer Troubleshooting Specification ValueRelated Documentation Obtaining Documentation and Submitting a Service Request Page USA

UCSSPENTVB200M3 specifications

Cisco Systems has long been a stalwart in the networking and telecommunications industry, offering a comprehensive range of products designed to enhance connectivity and communication for businesses around the globe. One such standout product is the Cisco UCSSPENTVB200M3. This model is part of Cisco's Unified Computing System (UCS), specifically tailored for environments requiring reliable and efficient data center solutions.

The Cisco UCSSPENTVB200M3 is characterized by its robust architecture that seamlessly integrates computing, networking, and storage resources in a single platform. This convergence is a significant advantage, as it simplifies management and reduces deployment costs. One of the primary features of this model is its scalability, allowing organizations to easily adjust their resources as their needs evolve. Whether a company is expanding, scaling down, or optimizing its operations, the UCS system provides the flexibility needed to maintain operational efficiency.

In terms of technology, the UCSSPENTVB200M3 employs Intel's Xeon processors, which are known for their powerful performance and energy efficiency. This choice of hardware ensures that the system can handle intense workloads and provides the computational power necessary for data-intensive applications. Additionally, the system supports advanced virtualization technologies that enhance its capabilities, enabling multiple operating systems and applications to run on a single physical server, which maximizes resource utilization.

Another noteworthy characteristic of the UCSSPENTVB200M3 is its advanced security features. As data breaches become increasingly common, Cisco has prioritized the protection of information within its products. This model includes integrated security features that safeguard sensitive data and ensure compliance with industry regulations.

Connectivity is also a critical component of this system, featuring multiple network interfaces that support high-speed communication. This is essential for businesses that rely on real-time data transfer and cloud-based services. Furthermore, the UCS Manager interface simplifies the management of server resources, allowing administrators to automate tasks and maintain optimal performance with ease.

Overall, the Cisco UCSSPENTVB200M3 is an exceptional solution for modern data centers, offering a combination of performance, scalability, security, and ease of management. This product stands as a testament to Cisco's commitment to innovation and its ability to meet the demands of today's dynamic business landscape. With organizations increasingly relying on technology for growth, systems like the UCSSPENTVB200M3 are vital for driving efficiency and competitiveness in the digital age.
Top Page Image Contents