Cisco Systems UCSSPENTVB200M3 specifications Buttons, Connectors, Hard Drive Replacement

Page 4

Buttons

The Reset button is just inside the chassis and must be pressed using the tip of a paper clip or a similar item. Hold the button down for five seconds, and then release it to restart the server if other methods of restarting are not working.

The beaconing function for an individual server may get turned on or off by pressing the combination button and LED.

The power button and LED allows you to manually take a server temporarily out of service but leave it in a state where it can be restarted quickly. If the desired power state for a service profile associated with a blade server or an integrated rack-mount server is set to "off", using the power button or Cisco UCS Manager to reset the server will cause the desired power state of the server to become out of sync with the actual power state and the server may unexpected shutdown at a later time. To safely reboot a server from a power-down state, use the Boot Server action in Cisco UCS Manager.

Connectors

The console port allows a direct connection to a blade server to allow operating system installation and other management tasks to be done directly rather than remotely. The port uses the KVM dongle cable (N20-BKVM) which provides a connection into a Cisco UCS blade server; it has a DB9 serial connector, a VGA connector for a monitor, and dual USB ports for a keyboard and mouse.

With this cable, you can create a direct connection to the operating system and the BIOS running on a blade server. A KVM cable ships standard with each blade chassis accessory kit.

Figure 2: KVM Cable for Blade Servers

1

Connector to blade server slot

3

VGA connection for a monitor

2

DB9 serial connector

4

2-port USB connector for a mouse and keyboard

Hard Drive Replacement

Each blade has up to two front-accessible, hot-swappable, 2.5-inch drives. Unused hard drive bays should always be covered with cover plates (N20-BBLKD) to ensure proper cooling and ventilation.

You can remove blade server hard drives without removing the blade server from the chassis.

The drives supported in this blade server come with the drive sled attached. Spare drive sleds are not available. A list of currently supported drives is in the specification sheets at: http://www.cisco.com/en/US/products/ps10280/products_data_sheets_list.html

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Cisco UCS B200 M3 Blade Server Installation and Service Note Cisco UCS B200 M3 Blade Server LEDsLED Color DescriptionHard Drive Replacement ConnectorsButtons Removing a Blade Server Hard Drive RAID ConsiderationsBlade Server Removal and Installation Installing a Blade Server Hard DrivePowering Off Blade Servers Using the Power Button Removing a Blade ServerInstalling a Half-width Blade Server Positioning a Blade Server in the ChassisSecure Digital SD Card Access Removing a Blade Server CoverOpening a Cisco UCS B200 M3 Blade Server Air Baffles Cisco UCS B200 M3 Air BafflesDiagnostics Button and LEDs Internal ComponentsInstalling a Motherboard Cmos Battery Working Inside the Blade ServerCPU and Heatsink Replacement Location of the Motherboard Cmos BatteryRemoving a CPU and Heat Sink Removing the Heat Sink and Accessing the CPU Socket StepInstalling a New CPU and Heat Sink Protective Cap Removal Lift the tool and CPU straight up off of the pedestal Using the CPU Pick and Place Tool to Insert the CPU Replacing the Heat Sink B200 M3 Shown Installing Memory Memory and PerformanceInstalling DIMMs in the Blade Server Supported DIMMsMemory Arrangement DIMMs and ChannelsPhysical Representation of DIMMs and Channels Figure below shows a logical view of the DIMMs and channels Memory Performance DIMMs per CPU CPU 1 installed slots CPU 2 installed slotsMemory Mirroring and RAS Installing a Modular LOM Installing an mLOMInstalling an Adapter Card Installing an Adapter Card Enabling a Trusted Platform ModuleSpecification Value Server TroubleshootingRelated Documentation Obtaining Documentation and Submitting a Service Request Page USA

UCSSPENTVB200M3 specifications

Cisco Systems has long been a stalwart in the networking and telecommunications industry, offering a comprehensive range of products designed to enhance connectivity and communication for businesses around the globe. One such standout product is the Cisco UCSSPENTVB200M3. This model is part of Cisco's Unified Computing System (UCS), specifically tailored for environments requiring reliable and efficient data center solutions.

The Cisco UCSSPENTVB200M3 is characterized by its robust architecture that seamlessly integrates computing, networking, and storage resources in a single platform. This convergence is a significant advantage, as it simplifies management and reduces deployment costs. One of the primary features of this model is its scalability, allowing organizations to easily adjust their resources as their needs evolve. Whether a company is expanding, scaling down, or optimizing its operations, the UCS system provides the flexibility needed to maintain operational efficiency.

In terms of technology, the UCSSPENTVB200M3 employs Intel's Xeon processors, which are known for their powerful performance and energy efficiency. This choice of hardware ensures that the system can handle intense workloads and provides the computational power necessary for data-intensive applications. Additionally, the system supports advanced virtualization technologies that enhance its capabilities, enabling multiple operating systems and applications to run on a single physical server, which maximizes resource utilization.

Another noteworthy characteristic of the UCSSPENTVB200M3 is its advanced security features. As data breaches become increasingly common, Cisco has prioritized the protection of information within its products. This model includes integrated security features that safeguard sensitive data and ensure compliance with industry regulations.

Connectivity is also a critical component of this system, featuring multiple network interfaces that support high-speed communication. This is essential for businesses that rely on real-time data transfer and cloud-based services. Furthermore, the UCS Manager interface simplifies the management of server resources, allowing administrators to automate tasks and maintain optimal performance with ease.

Overall, the Cisco UCSSPENTVB200M3 is an exceptional solution for modern data centers, offering a combination of performance, scalability, security, and ease of management. This product stands as a testament to Cisco's commitment to innovation and its ability to meet the demands of today's dynamic business landscape. With organizations increasingly relying on technology for growth, systems like the UCSSPENTVB200M3 are vital for driving efficiency and competitiveness in the digital age.
Top Page Image Contents