Motion Computing LE1600TC, AB52242 Calibrating Your Digitizer Pen, RitePen Software Application

Chapter 2 Using Your Motion Tablet Client

Calibrating Your Digitizer Pen

To calibrate your digitizer pen:

1.Select Start > Control Panel.

2.In the navigation pane of the Control Panel, tap Switch to Classic View.

3.Double-tap the Wacom Pen Settings icon.

4.Tap the Calibrate tab.

5.Tap the Calibrate button, and then follow the instructions in the Calibration window.

Refer to the following to compare mouse and pen actions:

	Mouse versus Pen Actions
Action With a Mouse	Action With the Digitizer Pen
Point and click	Point and tap the pen on the display.
Double-click	Double-tap the pen on the display.
Click-and-drag	Tap-and-drag the pen on the display.
Right-click	Press the pen button while tapping.

ritePen Software Application

The ritePen software application is a handwriting recognition application that is included with the LE1600TC Tablet Client and is accessed through the Start > All Programs > Evernote > ritePen > ritePen menu selection.

If the application was previously started, a ritePen icon is displayed in the system tray.

When ritePen is not enabled or active, the pen icon in the system tray is covered with a red circle and slash. Tapping the icon alternately enables and disables the application.

When using ritePen for handwriting recognition, you can write anywhere on the screen. The handwriting is transformed into typed text in the active application window. For example, if you are using Microsoft Word (via the Remote Desktop Protocol) and you are writing with the digital pen, the words you write are entered as text in Microsoft Word. There is a slight delay between the time you write text and the word or words appear in the active application window. The following is an example of ritePen being used to enter text into Notepad.

20Motion Computing LE1600TC Tablet Client User Guide