Chapter 2 Using Your Motion Tablet Client
5.Type in a New Password.
6.Tap Enter.
7.Type in the password to confirm it.
8.Tap Enter. The system returns to the Security screen and the HDD Password is Set. (When you exit then
9.If you have finished setting up a password, tap Exit or press the Esc key on the Tablet Client to exit the PhoenixBIOS Set Up Utility.
10.When you exit, you are prompted to select from the following options:
•Exit Saving Changes
•Exit Discarding Changes
•Load Set Up Defaults
•Discard Changes
•Save Changes
11.Select the desired action.
12.Confirm the selection by tapping Yes.
Clearing Tablet Client Security
To clear the Tablet Client PhoenixBIOS security:
1.Start the Tablet Client.
2.When the Motion Computing splash screen appears, quickly press Rotate Display button. If you miss the splash screen, turn the Tablet Client off then back on and try this step again.
3.From the PhoenixBIOS Set Up Utility, tap Security on the menu bar. If you have rebooted, you will be prompted to enter the password(s) you have set up.
4.To clear the System and Password on boot passwords,
5.Type in the Current Password.
6.Leave the space blank next to Enter New Password.
7.Tap Enter.
8.Leave the space blank to Confirm New Password.
9.Tap Enter.
10.When the Security screen appears, the System Password should be Clear and the Password on boot Disabled.
11.To clear the HDD password,
12.Type in the Current Password.
13.Leave the space blank next to Enter New Password.
14.Tap Enter.
15.Leave the space blank to Confirm New Password.
16.Tap Enter.