Dell R805 owner manual Integrated Devices Screen

Additionally, for Microsoft® Windows® operating systems, you will need to install the AMD PowerNow!™ driver to enable this feature. The driver is available on the Dell OpenManage™ Service and Diagnostic CD provided with your system, and at support.dell.com.

Integrated Devices Screen

Table 2-5 lists the options and descriptions for the information fields that appear on the Integrated Devices screen.

Table 2-5. Integrated Devices Screen Options

Option	Description
Integrated SAS/RAID	Enables or disables the integrated SAS controller.
Controller
(Enabled default)
Optical Drive Controller	Enables or disables the integrated optical drive controller.
(On default)
User Accessible USB Ports	Enables or disables the system’s user accessible USB
(All Ports On default)	ports. Options are All Ports On, Only Back Ports On, and
	All Ports Off.
Internal USB Port	Enables or disables the system’s internal USB port.
(On default)
SD Card Port	Enables or disables the system’s internal SD card port.
Embedded Gb NICx	Enables or disables the system's integrated NIC. Options
(NIC1 default: Enabled	are Enabled, Enabled with PXE, Enabled with iSCSI
with PXE;	Boot, and Disabled. PXE support allows the system to
Other NICs: Enabled)	boot from the network. Changes take effect after the
	system reboots.
MAC Address	Displays the MAC address for the integrated 10/100/1000
	NIC. This field does not have user-selectable settings.
Capability Detected	Displays the NIC features provided by the LOM NIC
	hardware key installed in the TOE_KEY socket on the
	system board.
	NOTE: Some LOM features may require the installation of
	an additional driver.

54

Using the System Setup Program