Axis Communications AXIS 5550, AXIS 5500 manual Select Admin Logical Printers and the PR3 tab

Configuration Possibilities

4.Set the PostScript Page Size parameter to LETTER.

5.Set the PostScript Page Orientation parameter to LANDS.

6.Enter the string 48 0 120 60 30 50 in the PostScript Page Format text field.

Hex code	Explanation
48	48 lines per page
0	disable line wrap
120	120 = 12 characters per inch
60	60	= 6 lines per inch
30	30	= 3 mm left margin
50	50	= 5 mm top margin

7.Enter the string Helvetica in the PostScript Font text field.

8.Click the OK button.

Redirecting Print Jobs If print data is received for a printer that is already busy, the host

when a Printer is Busy normally must wait. However, if you have an AXIS 5500 it is possible to use a logical printer to redirect the print data to another logical printer when the target printer is busy. If the second printer is also busy, the host must wait until the target printer is ready.

Example: Follow the instructions below to redirect PR1 print jobs to PR3, when the printer assigned to PR1 is busy:

1.From the print server’s internal Web page, select Admin Logical

Printers.

2.Select the PR1 tab.

3.Set the Physical Port parameter to USB1.

1.Set the Secondary Printer parameter to PR3.

2.Set the Wait On Busy parameter to NO.

3.Click the OK button.

4.Select Admin Logical Printers and the PR3 tab.

5.Set the Physical Port parameter to LPT1.

6.Click the OK button.

Notes:

•The two printers must use the same printer driver.

•Logical Printer redirection cannot be nested. If PR3 is redirected to another logical printer, the print job will not be redirected if PR3 is busy.

•If both printers are busy, the print job will be printed on the printer that first finishes its active print job.

116 AXIS 5500 / AXIS 5550 User’s Manual