Axis Communications AXIS 5550, Network Print Servers, AXIS 5500 manual Using Snmp

Page 98

Management and Configuration

Performing Resets Three types of reset commands allow you to perform soft resets, to perform hard resets, and to reset the print server’s parameters to its default settings.

Follow the instructions below to perform a soft reset using telnet:

1. Log in to the Axis Network Print Server by typing:

telnet <host name> or telnet <IP address> in a DOS window

(Windows) or in a UNIX shell.

2.Enter the user id and the password. (The default entries are root and pass.)

3.Restart the print server’s protocols by typing:

softreset

Replace the command in step 3 above with hardreset or default to perform the other two reset operations.

Using SNMP

You can use SNMP (Simple Network Management Protocol) for remotely monitoring and configuring of the Axis Network Print Server. All major functions for print servers are supported.

General Information SNMP refers to a set of standards for network management, including a protocol, a database structure specification, and a set of data objects. The Axis Network Print Server SNMP implementation runs in the TCP/IP environment.

The management is handled by NMS (Network Management System) software running on a host on your network. The NMS software communicates with network devices by the means of messages, which are references to one or more objects.

A message can be a question or an instruction to a device, or an alarm triggered by a specific event in a device. Objects are contained in data bases called MIBs (Management Information Base), where MIB-II is a standard database.

The Axis Network Print Server supports all relevant parts of MIB-II and also includes a private enterprise MIB. Refer to The AXIS MIB, on page 99.

System Requirements The following requirements must be fulfilled in order to make full use of for SNMP the Axis Network Print Server SNMP support:

•NMS software that allows you to install private enterprise MIBs

•A host, supporting FTP, on which to run the NMS software

Follow these steps to add the AXIS MIB to your NMS software:

98	AXIS 5500 / AXIS 5550 User’s Manual

Image 98

Contents Axis 5500/AXIS Network Print Servers Axis 5500 / Axis 5550 User’s ManualRegulatory Information Table of Contents 101 NetWare Parameter Combinations About this Manual Support ServicesSection Introduction About AxisSupported Environments Network Printing WindowsAxis 5500 & Axis Package ContentsProduct Overview Axis Network Product CD Physical Description AxisFeatures and Benefits Mounting the Axis 5500/AXISProduct Overview Quick Overview Basic InstallationConnecting the Hardware Axis Follow these steps to make your printer network readyBackside label on print server Address of the print server manually Assigning an IP Address to the Print ServerTest page you print by pressing the test button once Manual IP Address Set the IP Address with Dhcp Using Rarp UNIX/Linux ExampleExample Using ARP UNIX/Linux and Mac Using ARP Windows 98/NT Me/2000/XPOpen a Command Prompt and enter the following commands Open a Terminal and enter the following commandsMaking Network Printers available for printing on your PC TCP/IPEnvironment Method Description Client Software Windows Installation method according to your computer environment Adding Printers in WindowsAdding Printers in Windows Wizard searches for a suitable printer driver Windows Interface pagesWindows XP/Server Axis 5500 / Axis 5550 User’s Manual Click Next and Finish Add Microsoft TCP\IP Printing Select ServicesSelect Protocols Add TCP\IP Protocol Ports available USB port Parallel port Axis Printer Click NextList, click Add Port Close Add/Remove Programs and the Control Panel Basic SetupClick Next and Finish Add Printer Wizard. Click NextGo to Start Settings Printers Axis Print Monitor Software US1 US1 Adding Printers in Windows Port number USB port Parallel port Axis Example AX100086.US1 Axis 5500 / Axis 5550 User’s ManualAdding Printers in Windows Adding Printers in Macintosh Bonjour Printing in Mac OS= Bonjour Service Name If you want to print using LPR, select Installation in Mac OS X using AppleTalkInstallation of LPR printing in MAC OS From the Printer List dialog, select AppleTalkInstallation on Mac OS 9.1 or older, using AppleTalk Choosing a PrinterClick the LaserWriter 8.0 icon Adding Printers in Macintosh 192.168.3.191 ATYPE1 EPSONLQ2Adding Printers in NetWare IPX/SPXSetup using Ndps Type a name of your choice in the Ndps Printer Agent field Click OKTCP/IP Network protocol IPX Network protocolAdding Printers in NetWare Controlled Access Printers AXIS5FF66AIPX1 Adding Printers in NetWare TCP/IP Network protocol Example 01d7e1c200408c5ff6a6400c, where If the printer is not in the displayed print list D7e1c200408c5ff6a6 and LPT1NW 5.1 File Server\SYSPUBLIC\Win32 WorkstationOn the any workstation, browse to Start Nwpmw32.exe Novell Printer ManagerClick Add. a list of available printers appears Axis 5500 / Axis 5550 User’s Manual Select Network printer and click Next Setup using iPrint Installing Axis IPP Gateway Configuration Snap For NetWareType TOMCAT33 Enter Type Nvxadmup Enter Type Nsweb Enter Click on iPrint Management on the left pane Click on Create PrinterHttp//IP address of your NW server631/IPP Basic Setup with Axis NetPilot Choose the with Installation Wizard optionAXIS1A0003USB1Q Advanced Installation using Axis NetPilot Button Installing Axis Network Print Server Basic Queue-based printing over IPHave just captured Web browser for Print Server Management onPrint Layout Printer StatusNotification Spooling Adding Printers in UNIX/LinuxPrint Tools Typical Invocation via a Windows Manager Click the Add a new printer buttonTypical Invocation from a Terminal Window Also see TCP Ports Opened for Raw Printing onDebian Invocation Print QueuesRed Hat Main printconf window Select Unix Printer from the Queue Type menu, and click NextSuSE Axis axinstall Script Print Methods on TCP/IP Networks Uses industry standard network software on the hostLimitations TCP/IP Printing NetBIOS/NetBEUI Printing in OS/2Adding Printers in OS/2 US1 Print Queue Open LAN Server AdministrationCreating DownWeb Pages Updating the FirmwareUpgrading the Firmware TCP/IP Network Obtaining the Software Example using print server IP addressChange to binary mode transfer Type bin hash or binary hash and press EnterManagement and Configuration Using a Web browser for Print Server ManagementManagement and Configuration Management and Configuration Management and Configuration Using Axis ThinWizard for Print Server Management Axis ThinWizard interface appears Using FTP for Print Server Management Put config Config ExampleUsing Telnet Typical Telnet session to view the Account File Using Snmp Using Novell Utilities 100 Auto-IP Configuration PossibilitiesAutodetect Printer Type Auto-IP, onMail Notification IPP Internet Printing ProtocolIPP Printing RequirementsIPP Choose Add Printer. The Add Printer Wizard will start Open Start Settings PrintersWindows NT Computer Axis 5500 / Axis 5550 User’s Manual 105Available Ports window, click Add Port HP Internet Printer Connection will start. Click NextNext 108 Configuration Possibilities 110 Logical Printers for Customized Printing Set the parameter Character Set Conversion to Isoibm PrintersSelect the PR1 tab Set the parameter Physical Port to USB1 Set the parameter Character Set Conversion to DecibmSelect the PR4 tab Axis 5500 / Axis 5550 User’s Manual 113Select the PR1 Web Set the Printer Language Translation parameter to Postscr Axis 5500 / Axis 5550 User’s Manual 115Select Admin Logical Printers and the PR3 tab Set the Physical Port parameter to LPT1 Click the OK buttonAxis 5500 / Axis 5550 User’s Manual 117 Network Speed NetWare Packet Signature LevelsFlashloading New Firmware into the Print Server Changing Language in the Print Server’s Web InterfaceTCP/IP Restrictions Enabling Secure Web Services SSL/TLS CertificatesImporting a Certificate Over httpsOverriding Port Status Axis 5500 / Axis 5550 User’s Manual 123Enabling the SNMPv3 Protocol Click the Create initial user buttonSection Type OneType Two Obtaining an IP Address and Subnet MaskAxis 5500 / Axis 5550 User’s Manual 127 128 Test Button Web Interface TroubleshootingLED Indicators Established Replies132 Supported Systems Technical SpecificationSupported Protocols NetBIOS/NetBEUI Printer Connection Approvals DimensionsHardware 136 Parameter List Axis 5500 / Axis 5550 User’s Manual 137Japanese ROOTPWD. passISO-8859-1 SHIFTJIS, ISO-8859-1, UTF-8 LLC MenuDEFIPFRAMETYPE. EthernetII EthernetII, Snap WINSADDR1 0 0 WINSADDR2 0 0DNSADDR1 0 0 DNSADDR2 0 0 FR8023. YES SNMPv3 MenuNetWare Menu NETWENB. YES FR8022. YESParameter List PR7 PR5PR6 PR8PR2STR 66 0 100 60 30Printer2 Menu PR2NAME Printer3 Menu PR3NAMEPrinter5 Menu PR5NAME Printer4 Menu PR4NAMEPR4STR PR5STR 0A 02 0D 0APR7STR 0A 02 0D 0A 01 0A 02 0D 0APrinter7 Menu PR7NAME Printer8 Menu PR8NAMEEmail Menu USB1 MenuU1READT Axis 5500 / Axis 5550 User’s Manual 147 PROSPWD. netprinter Prosprt EthernetII, SnapTCP/IP Printing Menu 9100-9101, ClosedAxis 5500 / Axis 5550 User’s Manual 149 PR2 PR1LPRINT2. AX60F4A1.US1 150Axis 5500 / Axis 5550 User’s Manual 151 PR3PR4 Printer2 Menu LPT1PR1 PR1, PR2, PR3, PR4, PR5, PR6, PR7, PR8 USB1Printer4 Menu Printer3 MenuPR3 PR1, PR2, PR3, PR4, PR5, PR6, PR7, PR8 PR4 PR1, PR2, PR3, PR4, PR5, PR6, PR7, PR8Printer6 Menu Printer5 MenuPR5 PR1, PR2, PR3, PR4, PR5, PR6, PR7, PR8 PR6 PR1, PR2, PR3, PR4, PR5, PR6, PR7, PR8Printer8 Menu Printer7 MenuPR7 PR1, PR2, PR3, PR4, PR5, PR6, PR7, PR8 PR8 PR1, PR2, PR3, PR4, PR5, PR6, PR7, PR8LPT1 Menu L1BSYTMNetWare Parameter Combinations TCP Ports Opened for Raw Printing Snmp Device IndexSelect Port and mark the Port you would like to change Using Windows XP as an exampleClick Configure Port Glossary Glossary Glossary Glossary 164 Index Axis 5500 / Axis 5550 User’s Manual 165Configuration methods Http Https Axis 5500 / Axis 5550 User’s Manual 167NetWare printing modes PowerPrint Problems NetworkProtocols Setting upPrinting Axis 5500 / Axis 5550 User’s Manual 169User View Certificate

Related manuals

Manual 34 pages 13.34 Kb