Axis Communications AXIS 5500, Network Print Servers, AXIS 5550 manual Setup using iPrint

Adding Printers in NetWare

When you have completed these steps, you are ready to start printing.

Notes:

•The Public Access print servers are immediately available for everyone on the network

•The Axis Gateway Configuration Utility is an installation and configuration tool for NDPS printers in the NetWare environment.

The Axis Gateway will appear in NetWare 5.1 and later releases. You can download the Axis Gateway Configuration Utility for use with earlier versions of NetWare from www.axis.com.

•To print using TCP/IP, Axis print server firmware 6.1 or later is required. In order to print using IPX/SPX, Axis print server firmware 5.51 or later is needed.

Setup using iPrint

Installing AXIS IPP

Gateway

Configuration Snap-

in for NetWare 6.0

iPrint is Novell's next generation of printing software that lets users print to and from all destinations.

A standard Web page displays available printers to the user.

By clicking a printer, the iPrint client is installed (if not installed previously), the printer's driver is downloaded, and a printer is created in the user's Printer folder, enabling the user to send documents to the printer from any application on the desktop.

Before setting up iPrint printers, make sure that you meet all the iPrint Setup requirements. See the Novell iPrint Administration Guide for instructions on installing, configuring, and customizing iPrint.

AXIS Print servers can be installed as iPrint printers, either by using the Novell LPR gateway (LPR on IP) or the AXIS Gateway Configuration Snap-in for iPrint.

Axis provides two free Snap-ins for iPrint:

•AXIS LPR Gateway Configuration

•AXIS IPP Gateway Configuration

When you install Service Pack 6 (16 April 2003) for NetWare 5.1 or later and Service Pack 3 (16 April 2003) for NetWare 6.0 or later, the AXIS LPR Gateway Configuration will automatically be installed and configured on the NetWare Servers and ready for use.

The AXIS IPP Gateway Configuration Snap-in for NetWare 6.0 can be downloaded for free from www.axis.com. Follow the instructions below to install the AXIS IPP Gateway Configuration Snap-in for NetWare 6.0, if you want to add it in your iPrint environment.

1.Download the free axisIPP-snap-in.zipfile from www.axis.com and unzip it in a temporary directory.

2.Make sure the the NetWare Enterprise Web Server was previously installed on the server. Otherwise, install it.

AXIS 5500 / AXIS 5550 User’s Manual 61