Axis Communications 700 user manual Cdb

Page 74

AXIS 700 User’s Manual

Appendix A: Troubleshooting

73

 

 

 

i s

This table lists the error and warning messages that might appear on the AXIS 700 message display:

u

l

 

 

Scanner lamp failure

 

The lamp in the scanner is broken. See the scanner

 

manual for instructions.

 

 

 

 

 

 

 

Scanner fuse blown

 

A fuse in the scanner is broken. See the scanner manual

 

for instructions.

 

 

 

 

 

 

Scanner compression

 

The image compression unit in the scanner did not work

unit failure

 

 

properly. Contact your scanner supplier.

 

 

 

 

Scanner hardware

 

 

The scanner reports a hardware failure. Contact your

failure

 

 

scanner supplier.

 

 

 

Scanner firmware failure

 

The scanner reports a software failure. Contact your

 

 

 

scanner supplier.

 

 

 

SCSI parameter length

 

The length of the SCSI command is illegal. Contact your

illegal

 

 

scanner supplier.

 

 

 

 

Invalid SCSI command

 

The scanner does not support the given SCSI command.

 

Contact your scanner supplier.

 

 

 

 

 

 

Invalid field in SCSI

 

The SCSI command includes an invalid field. Contact

CDB

 

 

your scanner supplier.

 

 

 

 

SCSI command

 

 

The scanner cannot receive the SCSI commands in the

sequence illegal

 

 

order they were sent. Contact your scanner supplier.

 

 

 

Invalid field in SCSI

 

The SCSI parameter block includes one or several invalid

parameter list

 

 

fields. Contact your scanner supplier.

 

 

 

 

Scanner not ready,

 

An error has occurred in the communication between the

 

scanner and the AXIS 700. For example the copier might

please check scanner

 

 

have been taken out of scan mode and does not respond

and restart the scan

 

 

to any commands. That is why the scanner should be

server.

 

 

 

 

checked and the AXIS 700 restarted.

 

 

 

 

 

 

A timeout has occurred

 

The AXIS 700 has not had any communication with the

on the scanner, the job

 

scanner and the scanner has timed out. Scan the

has been canceled

 

 

documents again.

 

 

 

 

 

 

 

The scanned image contains too much data. Please try

Out of memory

 

 

another scanning profile. If required, you can expand the

 

 

RAM memory as described on the AXIS 700 Support

 

 

 

 

 

 

Web.

 

 

 

 

 

 

 

The internal store in the copier has been filled up. This

 

 

 

can happen if you scan a document with many pages in

Out of scanner image

 

the document feeder. When you press send, there is not

memory

 

 

enough internal memory to keep the pages. Please divide

 

 

 

the pages and use the scan button instead. The whole

 

 

 

document has to be re-scanned.

 

 

 

 

Image 74
Contents E rs M a n u a l v 1 User’s Manual OlXg D77 User’s ManualAxis 700 User’s Manual Revision Copyright Axis Communications AB, 1997OlXg D77 User’s Manual Preface Dwy OlXg D77 User’s Manual Table of Contents Huv OlXg D77 User’s Manual Introduction Zny SII t yXyyy GywXxXxy Kyv gyAuy Axis 700 over the network using FTPThan the other way around GywXx OlXg D77 User’s Manual Basic Installation Guxux xyyGywPuXu Puw duy Duy$,6 9HUVLRQ Up and Down keys scroll and select menu options Cancel keyAy The Menu key scrolls the menu Enter key RuwyChanges to the network configuration Scanning device documentation on how to do thisAlways consult the Network Administrator before making Turn off the Axis 700 by unplugging the power supplyAfter a few seconds this display will be shown Where x.xx is the software version numberPower up the Axis 700. Press Menu Press Enter to edit the subnet mask Press Enter to edit the default router addressPress Enter to edit the IP address Byy Press Menu once more to display the final instructionsJyy From the Axis 700 control panelXd Oxx CyyzSux SWRdAu bu IWRd Your Axis 700. Type arp -a to display the ARP table Host will return ‘Reply from 172.19.2.254...’ or a similarCommunication is established Ether for Ethernet networks, e.g. arp -s ether spserv IbXl u cg69IP address and verify the communication Ethernet address Host name Where Typically performed using the command bootpd -aIcchd Required by your systemHttp//172.19.2.254 GywPuXu OlXg D77 User’s Manual Configuring the Axis Network protocol settingsGywRlXg D77 This brings you to the Axis 700 HomeOlXg D77 User’s Manual Configuring the Axis Click Network Settings Oxxy Auhd0Tyu Sy jyGywRlXg D77 OlXg D77 User’s Manual Configuring the Axis T4hd0 From this page you can set the following parametersTu Oxxy =countrycode Description, Transfer method and Destination fields are Configuration parameters are described in The ParameterLast five fields only apply to file destinations. Mandatory for all destination types. For FTP destinations,Destination list on the Axis 700 control panel Table. Click Detailed to view the detailed settingsDestination Name is the text that will appear Can make these temporary destinations permanent by clickingMail destinations Mail addresses using the Smtp protocolT4uy GywRlXg D77 Will be stored When the URL is sent to an e-mail destinationIf z Tu Information Click Destination Defaults to change the default valuesSyyzu Filenamesequencenumber.fileextension, e.g. image001.tif GywRlXg D77 Iy c Axis 700 interface Most needs. This table lists the predefined profilesProfile Name list to edit an existing profile Click New Profile to add a new profile to the listOlXg D77 User’s Manual Configuring the Axis GywRlXg D77 OlXg D77 User’s Manual Configuring the Axis GywRlXg D77 OlXg D77 User’s Manual Using the Axis Gywi Xg D77 T4uKyv P Gwu ifDestinations on Axis 700 display shows Send to xxxxxx when it isOptionally, press Menu To change the default settings for Perform these instructions from the Axis 700 control panelSetting Several separate pages or stacks of papersOther separation pages will be ignored Yv gyu gyyCanon DR-3020 scanner. a job separation sheet inserted in a Sharp AR-seriesLine Interface Administrator might not allow users to add temporaryDown or re-started Enter the name or IP address of your Axis 700 onOlXg D77 User’s Manual Using the Axis Depending on your scanning device, some profiles may not be This table outlines when to use the predefined profilesDefault profile is Text Black/white scanning devices, unless they can do gray-scaleDu g Maintained by the AdministratorDefault paper size is Letter SyxExample Several separate pages Owuyuxy XuxCRf uw OlXg D77 User’s Manual Using the Axis Owy Axis 700 User’s Manual Appendix a Troubleshooting FTPOG h Axis 700 User’s Manual Tml This table lists a summary of error conditions Gu Xxu By Xxwu czzCDB Flatbed only Work. Attached scanner id is displayed in the event log Event log is displayed Axis 700 Home Page is displayed. Click AdministrationField and press Enter Axis 700 User’s Manual Appendix B Ldap Ldap allows resources and services to be selected with easeAccessed with location-independence System looks likeAxis 700 User’s Manual Dwwu Objectclass=personcn=john Only want to retrieve entries of the people class, withCould be achieved with the following filter Axis 700 User’s Manual Appendix B Ldap Axis 700 User’s Manual As in the table below OlXg D77 User’s Manual Appendix C The Parameter ListGives a brief description of the parameter DefaultRouter ORG hURL Smtp = Destination name END Axis web site on how to join the AxisNews Compare against the latest software issues from AxisWhere you can download the latest versions of the software OlXg D77 User’s Manual Appendix D Updating the SoftwareOSG i y OlXg D77 User’s Manual Appendix D Updating the Software OSG i y Simple Mail Transfer Protocol Smtp server Client Web browser, and at least one of these protocolsFile Transfer Protocol FTP server Netscape Navigator 3.0 or higherOuu 12V DC 36VA, via external power unit Axis PS-C or Number is limited by the Eeprom memory. If using Ldap orSoftware over the network using FTP 12V DC 13,2VA, via external power unit Axis PS-EOuu OlXg D77 User’s Manual Appendix F Glossary Axis 700 User’s Manual OlXg D77 User’s Manual Appendix F Glossary 100 OlXg D77 User’s Manual Index 101 Http OlXg D77 User’s Manual Index 103 Dhcp Rarp
Related manuals
Manual 6 pages 3.58 Kb