Safety Instructions

Caution:

To reduce the risk of electric shock, do not remove the back panel. No user-serviceable parts inside. Refer servicing to qualified personnel.

Explanation of Graphical Symbols

The lightning flash within an equilateral triangle is intended to alert you to the presence of unin- sulated "dangerous voltage" within the product’s enclosure that may be of sufficient magnitude to constitute an electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance

1Read Instructions – All the safety and operating instructions should be read before the appliance is operated.

2Retain Instructions – The safety and operating instructions should be retained for future reference.

3Heed Warnings – All warnings on the appliance and in the operating instructions should be adhered to.

4Follow Instructions – All operating and use instructions should be followed.

5Water and Moisture – The appliance should not be used near water – for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool and the like.

6Carts and Stands – The appliance should be used only with a cart or stand that is recommended by the manufacturer.

7Wall or Ceiling Mounting – The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.

8Ventilation – The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or placed in a built-in installation, such as a bookcase or cabinet, that may impede the flow of air through the ventilation openings.

9Heat – The appliance should be situated away from heat sources such as radiators,

heat registers, stoves, or other appliances that produce heat.

10Power Sources – The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.

11Grounding or Polarisation – The appliance is double insulated and does not need to be grounded for safety. However, not grounding the appliance may increase the level of hum breakthrough. When using an extension power-supply cord or a power-supply cord other than that supplied with the appliance, it should be fitted with the appropriate moulded-on plugs and carry safety approval appropriate to the country of use.

12Power Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed on or against them, paying particular attention to cords at plugs, convenience receptacles and the point where they exit from the appliance.

13Cleaning – The appliance should be cleaned only as recommended by the manufacturer.

14Non-use Periods – The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.

15Object and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

16Damage Requiring Service – The appliance should be serviced by qualified personnel when:

aThe power-supply cord or the plug has been damaged; or

bObjects have fallen, or liquid has been spilled into the appliance; or

cThe appliance has been exposed to rain; or

dThe appliance does not appear to operate normally, or exhibits a marked change in performance; or

eThe appliance has been dropped, or the enclosure damaged.

17Servicing – The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel.

WARNINGS

To prevent fire or shock hazard, do not expose this equipment to rain or moisture.

Observe all warnings on the equipment itself. To avoid electrical shock, do not open the enclosure or remove the amplifier from the rear panel. There are no user serviceable parts inside. Refer all service questions to an authorised B&W dealer.

To prevent electric shock, do not use this (polarised) power plug with an extension cord receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.

Ensure that the voltage indicated on the amplifier panel matches that of the power supply.

The mains fuse holder is located on the back panel of the amplifier module. Replacement fuse must be of the same type and rating as supplied.

An earth (ground) connection is provided in the mains input socket. However, the equipment is double insulated and will operate safely without being earthed (grounded), but may suffer increased levels of hum breakthrough.

To ensure adequate cooling of the amplifier, operate the equipment only with the heatsink fins aligned vertically.

Check that there are no cables under the carpet that may be damaged by the spikes.

Do not walk the unit on the spikes as this may cause them to become detached from the cabinet and cause damage.

Take care not to impale your feet with the spikes.

600 Series2 specifications

Bowers & Wilkins, a renowned name in the audio industry, continues its legacy of excellence with the 600 Series 2, a set of speakers that beautifully combines innovative technology with exceptional sound quality. The 600 Series 2 is engineered to deliver an immersive listening experience, making it ideal for both music enthusiasts and home theater systems.

One of the standout features of the 600 Series 2 is its use of the latest Kevlar® drivers. Known for their superior rigidity and low distortion, these drivers ensure that sound reproduction is clear and detailed. The midrange and bass drivers are crafted to deliver an expansive soundstage, allowing listeners to engage with their music or movies more profoundly. The bass performance, in particular, is enhanced by a dedicated, optimized enclosure design that reduces unwanted resonances.

Another highlight of the 600 Series 2 is the use of Bowers & Wilkins’ proprietary Decoupled Double Dome Tweeter technology. This innovative design minimizes distortion and maximizes high-frequency clarity, resulting in rich, airy treble sounds that elevate any audio performance. The tweeters are housed in their own isolated compartments, ensuring that they are not affected by the vibration of the other drivers, providing an unblemished listening experience.

The cabinet construction of the 600 Series 2 is equally impressive. Built with advanced materials and finishes, the speakers feature a blend of strength and aesthetic appeal. The sleek design fits seamlessly into any environment, whether it be a modern living room or a dedicated home theater. The speakers are available in various finishes, allowing users to choose the style that best suits their decor.

For those looking to expand their audio system, the 600 Series 2 is designed to integrate seamlessly with other Bowers & Wilkins products. The range includes floor-standing speakers, bookshelf options, and center channel speakers, all crafted to work together harmoniously, providing a cohesive sound experience.

Furthermore, the speakers are engineered with versatility in mind. They can easily handle low and high power outputs, making them suitable for both casual listening and high-end audio setups. With this adaptability, users can enjoy their favorite music or movies without compromising on sound quality, regardless of the volume.

In summary, the Bowers & Wilkins 600 Series 2 speakers represent a stellar combination of cutting-edge technology, superior craftsmanship, and sleek design. With features such as Kevlar® drivers, Decoupled Double Dome Tweeter technology, and an elegant cabinet finish, they are poised to deliver an exceptional audio experience for years to come. Whether you are a casual listener or an audiophile, the 600 Series 2 is an investment that promises to impress.