DHCP Configuration
A DHCP server can be configured to assign IP addresses to devices connected to the LAN port. To configure these ports, choose LAN from the Network menu.
DHCP Configuration
Item | Description |
DHCP Server | Enable or disable the DHCP server to automatically assign IP |
| address to PCs connected to the LAN interface. |
Start IP | Specifies the starting IP address of the DHCP range. |
End IP | Specifies the ending IP address of the DHCP range. |
DNS Server | Specifies the DNS server IP address. |
NOTE
WARNING
The IP Segment of WAN and LAN should not overlap.
The IP address of the LAN interface should not be in the range of the Start IP address and End IP address.
Web Services Configuration
From the Network menu, choose the Service item, and the Web Service screen appears. This screen displays the service support parameters of the system. You can change any of these items and press Apply to confirm your settings. A description of each item follows:
Web Service
Item | Description |
HTTP (WebDisk) | Enable or disable WebDisk support. Enter the port number if this |
Support | option is enabled. |
HTTPs (Secure | Enable or disable secure WebDisk support. Enter the port if this |
WebDisk) Support | option is enabled. |
SMB/CIFS | Enable or Disable SMB/CIFS protocol for Windows, Apple, Unix |
| drive mapping. |
UPnP | Enable or disable Universal Plug and Play protocol. UPnP helps to |
| find the IP address of the 1U4500. |
NOTE
•Disable HTTP support and Enable Secure HTTP support to guarantee secure access.
•In some environments, due to security concerns, you may wish to disable SMB/CIFS as a precaution against computer viruses.
32