LAN Configuration
The N299 supports a second Ethernet port for higher service availability. To configure these ports, choose LAN from the Network menu, and the LAN Configuration screen appears. Press Apply to save your changes.
LAN Configuration
Item | Description |
MAC Address | Displays the MAC address of the LAN interface. |
Jumbo Frame Support | Enable or disable Jumbo Frame Support on the LAN interface. |
IP | Specifies the IP address of the LAN interface. |
Netmask | Specifies the Network Mask of the LAN interface. |
DHCP Server Configuration | |
Item | Description |
DHCP Server | Enable or disable the DHCP server to automatically assign IP |
| addresses to PCs connected to the LAN interface. Default is |
| Disabled. |
Start IP | Specifies the starting IP address of the DHCP range. |
End IP | Specifies the ending IP address of the DHCP range. |
DNS Server | Specifies the DNS server IP address. |
Apply | Click Apply to save your changes. |
Cancel | Click Cancel to abandon your changes. |
NOTE
•Before enabling Jumbo Frame Support, please make sure your network equipment supports Jumbo Frame. If your equipment is incompatible, you might not be able to connect to your N299. In this case, you have to reset the system back to default by the holding down rear panel reset button for 15 seconds during boot up process.
•The IP Segment of WAN and LAN should not overlap.
WARNING | The IP address of the LAN interface should not be in the range of the Start IP |
address and End IP address. |
DDNS Configuration
The N299 also features Dynamic DNS support. To configure DDNS, choose DDNS from the Network menu. Press Apply to confirm your settings.
DDNS Support
Item | Description |
Register | Support www.dyndns.org, www.zoneedit.com, www.tzo.com |
User Name | Input user name that you have register in DDNS domain. |
Password | Input password that you have register in DDNS domain. |
Domain Name | Input registered domain name. |
Apply | Click Apply to save your changes. |
Cancel | Input Click Cancel to abandon your changes. |
30