1.On the Nsync window, select the Nsync task you would like to delete by checking its checkbox.
2.Click Delete to remove the selected Nsync task.
Setting Up an Nsync Target on an Nsync Device
On the Nsync target server, the administrator of that server has to set up a user account with a folder named “nsync” and grant write access.
1.On the Nsync server, add a user for Nsync source (ex. nsyncsource1). For instructions on how to add a user on the N299, see Chapter 4: System
Management > User and Groups Management > Local User Configuration > Adding Users.
2.On the Nsync server, grant that user (ex. nsyncsource1) write access to the nsync folder. For instructions on how to set up a folder’s ACL, see
Chapter 4: System Management > Folder Management > Folder Access Control List (ACL).
3.Once this is done, the target server will start accepting Nsync tasks from server using that ID and password.
Setting Up an Nsync Target on Another Device
If you selected “Other Device” when setting up your Nsync task, the N299 will use the FTP protocol to back up the share folder. On the external storage device, make sure there is a folder named “nsync”, and the Auth ID has writable permission in that folder.
Designating N299 as an Nsync
Target
The N299 can act as an Nsync server, enabling another
Nsync Target Server Setting
Item | Description |
Nsync Target Server | Enable or Disable Nsync Target support. |
Apply | Click Apply to save your changes. |
Cancel | Click Cancel to cancel your changes. |
NOTE
To enable Nsync task to go thru firewall, you have to open port TCP/1194 on your firewall in both directions.
72