Network Computing Devices LSQ-40L Setting UP the Label Print, Removing the BAR Code, Enter

Page 18

SETTING UP THE LABEL PRINT:

If you are satisfied the way the labels are being printed, you can skip this section. If you are using Safe Handling Labels or want to customize your own label, then proceed to the next step.

REMOVING THE BAR CODE:

1). Enter PROGRAMMING MODE.

2). Press PROG FORMAT.

3). Press ENTER when you see FORMAT.

4). Use arrow up/dwn to find LABEL W/ GAP. Press ENTER.

5). Use arrow up/dwn to find CUSTOMIZED. Press ENTER.

6). Press ESC twice. Arrow down to NO BAR CODE. Press ENTER.

If you decide later to have a bar code, repeat the above procedure and select either EAN-13 or UPC-13 (depending on your POS).

SETTING UP THE BARCODE:

If your POS system cannot recognize the bar code, you may have to alter the way the bar code encodes the product data (makes the barcode).

1). Enter PROGRAMMING MODE.

2). Press PROG FORMAT.

3). Press ENTER when you see FORMAT.

4). Use arrow up/dwn to find LABEL W/ GAP. Press ENTER.

5). Use arrow up/dwn to find CUSTOMIZED. Press ENTER.

6). Press ESC twice. Arrow up/dwn and select either EAN-13 or UPC-13. Press

ENTER.

7). Arrow up/dwn until you see CUSTOMIZED. Press ENTER.

Page 18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Quick Start Manual Index Cleaning the Scale Communications with the ScalePage Setting UP the Scale for First Time Quick Test of the PrinterPage Setting UP the Network Configuring Your Network on Your ComputerConfiguring Your Network on the Scale To SEE/CHANGE Scales IP AddressStarting UP the LSQ-40L Software To ADD a NEW Scale to the NetworkConfigure General Parameters Adding Products to the Scale What YOU can Enter on this ScreenMoving Products to and from Scale Assigning Products to the Main KeyboardGeneral Configuration Under the Options BOXBAR Code TAB Print Format General TAB PasswordsPrinted Text on Label To Customize a LabelProgramming Using the Scales Keyboards To SET Amount of Text Lines to be Printed Edit Scrolling MessageConfiguration Removing the BAR Code Setting UP the Label PrintSetting UP the Barcode EnterPlacing Text on the Label SET UP Text on Label Below is a list of what you can put on a labelAdding PLU’S KEY AssignationProgramming Mode Problem Cause Page Limited Warranty Statement How to obtain Warranty Service Important Packing and Shipping Instructions
Top Page Image Contents