Packard Bell MT manual Cmos Battery, Location of main board screws

Page 18

1717171717

17

6. Remove two screws marked with a white triangle securing the main board.

Fig. 27 Location of main board screws.

7. Remove two screws from the bracket holding the main board.

Fig. 28 Location of main board bracket screws.

8. Lift the main board out of the casing.

CMOS Battery

To remove the CMOS battery, first remove the LCD assembly (see LCD Assembly on page 12), and then perform the following steps:

Packard Bell EasyNote MT Disassembly Manual

Image 18

Contents EasyNote MT Table of Contents About this Guide DisassemblyReassembly For More Information Technician NotesPower Supply Unit Hazardous VoltageAvoid Electrostatic Discharge Battery Hard Disk DriveDisconnecting and removing hard disk drive MemoryOptical Disk Drive Removing memory compartment cover77777 Remove the screw securing the optical disk drive Keyboard Location tray bezel lock undersideKeyboard Cover Removing keyboardTop Cover Location keyboard cover screws1111111111 Carefully disconnect the two WiFi antenna cables LCD Assembly Location of top cover screwsSpeakers Location LCD hinge screwsBluetooth Optional Location of speaker cable header on the main boardUSB Board Main BoardLocation of speaker brackets screws Cmos Battery Location of main board screwsWireless LAN Adapter TV Tuner OptionalIntel Turbo Memory Optional CPU and Heat SinkCarefully remove the CPU heat sink Hdmi Board Location of screw securing CPUAudio Board SubwooferTV Antenna Optional TouchpadButton Board LCD BezelInverter Board LCD PanelLocation of LCD cable connector Webcam/MicrophoneEasyNote MT Disassembly Manual