Packard Bell MT manual Remove the screw securing the optical disk drive

Page 8

77777

7

1. Remove the screw securing the optical disk drive.

Fig. 7 Location screw securing optical disk drive.

2.Use the emergency eject hole to open the optical disk drive.

3.Pull the tray and take out the optical disk drive from the drive bay (see Fig. 7).

4.Remove the two screws securing the metal bracket and remove it from the drive.

Fig. 8 Removing metal bracket.

Packard Bell EasyNote MT Disassembly Manual

Image 8

Contents EasyNote MT Table of Contents Disassembly ReassemblyAbout this Guide For More Information Technician NotesAvoid Electrostatic Discharge Power Supply UnitHazardous Voltage Battery Hard Disk DriveDisconnecting and removing hard disk drive MemoryOptical Disk Drive Removing memory compartment cover77777 Remove the screw securing the optical disk drive Keyboard Location tray bezel lock undersideKeyboard Cover Removing keyboardTop Cover Location keyboard cover screws1111111111 Carefully disconnect the two WiFi antenna cables LCD Assembly Location of top cover screwsSpeakers Location LCD hinge screwsBluetooth Optional Location of speaker cable header on the main boardUSB Board Main BoardLocation of speaker brackets screws Cmos Battery Location of main board screwsWireless LAN Adapter TV Tuner OptionalIntel Turbo Memory Optional CPU and Heat SinkCarefully remove the CPU heat sink Hdmi Board Location of screw securing CPUAudio Board SubwooferTV Antenna Optional TouchpadButton Board LCD BezelInverter Board LCD PanelLocation of LCD cable connector Webcam/MicrophoneEasyNote MT Disassembly Manual