Packard Bell MT manual TV Antenna Optional, Touchpad

Page 24

2323232323

23

2. Take out the subwoofer.

TV Antenna (Optional)

To remove the optional TV antenna cable, first remove the main board (see Main Board on page 15), and then perform the following steps:

1. Remove the screw securing the TV antenna connector.

Fig. 38 Location of TV antenna connector.

2. Clear the cable and take out the TV antenna.

Touchpad

To remove the touchpad module, first remove the top cover (see Top Cover on page 10), and then do the following:

1.Carefully release the white clip securing the touchpad flat cable and disconnect the cable from the header on the top cover.

Fig. 39 Location touchpad cable and screws.

Packard Bell EasyNote MT Disassembly Manual

Image 24
Contents EasyNote MT Table of Contents Disassembly ReassemblyAbout this Guide For More Information Technician NotesPower Supply Unit Hazardous VoltageAvoid Electrostatic Discharge Battery Hard Disk DriveDisconnecting and removing hard disk drive MemoryOptical Disk Drive Removing memory compartment cover77777 Remove the screw securing the optical disk drive Keyboard Location tray bezel lock undersideKeyboard Cover Removing keyboardTop Cover Location keyboard cover screws1111111111 Carefully disconnect the two WiFi antenna cables LCD Assembly Location of top cover screwsSpeakers Location LCD hinge screwsBluetooth Optional Location of speaker cable header on the main boardUSB Board Main BoardLocation of speaker brackets screws Cmos Battery Location of main board screwsWireless LAN Adapter TV Tuner OptionalIntel Turbo Memory Optional CPU and Heat SinkCarefully remove the CPU heat sink Hdmi Board Location of screw securing CPUAudio Board SubwooferTV Antenna Optional TouchpadButton Board LCD BezelInverter Board LCD PanelLocation of LCD cable connector Webcam/MicrophoneEasyNote MT Disassembly Manual