Packard Bell MT manual Hdmi Board, Location of screw securing CPU

Page 22

2121212121

21

7. Turn the screw in the CPU into the unlock position to release the CPU.

Fig. 34 Location of screw securing CPU.

8. Carefully take out the CPU from the socket.

I/O and HDMI Board

To remove the I/O and HDMI board, first remove the main board (see Main Board on page 15), and then do the following:

1. Remove the two screws securing the board to the main board.

Fig. 35 Removing the I/O and HDMI board.

Note: Fig. 35 shows the other side of the main board, the screws are located on the other side of the main board.

2. Disconnect the I/O and HDMI board from the main board.

Note: During re-assembly, align the I/O and HDMI board properly with the main board before reconnecting them to prevent damage to the pins of the connector on the main board.

Packard Bell EasyNote MT Disassembly Manual

Image 22

Contents EasyNote MT Table of Contents About this Guide DisassemblyReassembly For More Information Technician NotesHazardous Voltage Power Supply UnitAvoid Electrostatic Discharge Battery Hard Disk DriveDisconnecting and removing hard disk drive MemoryOptical Disk Drive Removing memory compartment cover77777 Remove the screw securing the optical disk drive Keyboard Location tray bezel lock undersideKeyboard Cover Removing keyboardTop Cover Location keyboard cover screws1111111111 Carefully disconnect the two WiFi antenna cables LCD Assembly Location of top cover screwsSpeakers Location LCD hinge screwsBluetooth Optional Location of speaker cable header on the main boardUSB Board Main BoardLocation of speaker brackets screws Cmos Battery Location of main board screwsWireless LAN Adapter TV Tuner OptionalIntel Turbo Memory Optional CPU and Heat SinkCarefully remove the CPU heat sink Hdmi Board Location of screw securing CPUAudio Board SubwooferTV Antenna Optional TouchpadButton Board LCD BezelInverter Board LCD PanelLocation of LCD cable connector Webcam/MicrophoneEasyNote MT Disassembly Manual