Packard Bell MT manual Carefully remove the CPU heat sink

Page 21

2020202020

20

2. Disconnect the fan cable from the header on the main board.

Fig. 32 Location of chipset heat sink screws.

3.Remove the three screws securing the heat sink in designated order (see Fig. 32).

4.Remove the fan/chipset heat sink.

5.Remove the four screws securing the CPU heat sink in designated order.

Fig. 33 Location of CPU heat sink screws.

6. Carefully remove the CPU heat sink.

Packard Bell EasyNote MT Disassembly Manual

Image 21

Contents EasyNote MT Table of Contents Reassembly DisassemblyAbout this Guide For More Information Technician NotesPower Supply Unit Hazardous VoltageAvoid Electrostatic Discharge Hard Disk Drive BatteryMemory Disconnecting and removing hard disk driveRemoving memory compartment cover Optical Disk Drive77777 Remove the screw securing the optical disk drive Location tray bezel lock underside KeyboardRemoving keyboard Keyboard CoverLocation keyboard cover screws Top Cover1111111111 Carefully disconnect the two WiFi antenna cables Location of top cover screws LCD AssemblyLocation LCD hinge screws SpeakersLocation of speaker cable header on the main board Bluetooth OptionalMain Board USB BoardLocation of speaker brackets screws Location of main board screws Cmos BatteryTV Tuner Optional Wireless LAN AdapterCPU and Heat Sink Intel Turbo Memory OptionalCarefully remove the CPU heat sink Location of screw securing CPU Hdmi BoardSubwoofer Audio BoardTouchpad TV Antenna OptionalLCD Bezel Button BoardLCD Panel Inverter BoardWebcam/Microphone Location of LCD cable connectorEasyNote MT Disassembly Manual