FieldServer FS-8700-43 instruction manual Vesda data format for command 16 Update Airflow Status

FS-8700-43 VESDA Driver Manual Page 16 of 18

4.5.6.VESDA data format for command 16 (Update Airflow Status)

This request returns the Current Airflow Status in a split data array (2 data arrays of different type in one map descriptor). The format for the data is as follows:

Data Arrays 1

	Column Title	Function		Legal Values
	Data_Array_Name	Provide name for Data		Up to 15 alphanumeric
		Array		characters
	Data_Format	Provides data format		BIT
	Data_Array_Length	Number of Data Objects		4
Data Arrays 2
	Column Title	Function		Legal Values
	Data_Array_Name	Provide name for Data		Up to 15 alphanumeric
		Array		characters
	Data_Format	Provides data format		BYTE
	Data_Array_Length	Number of Data Objects		4
Client Side Map Descriptors
	Column Title		Function		Legal Values
	Map_Descriptor_Name		Name of this Map Descriptor		Up to 32 alphanumeric
					characters
	Data_Array_Location		Starting location in Data		0
			Array
	Function		Function of Client Map		RDBC
			Descriptor
			Name of Node to fetch data		One of the node names
	Node_Name				specified in “Client Node
			from
					Descriptor” above
	Data_Type		Data type		Dig_input
	Length		Length of Map Descriptor		4
	Address		Starting address of read		0
			block
	Command		The command id		16
	Network		The network number		1-255
	Zone		The zone number		1-255
	Sector		The sector number		1-255
			Name of Data Array where
	DA_Bit_Name		data is to be stored in the		Data Array 1 name
			FieldServer.
	DA_Bit_offset		Starting location in Data		0
			Array.
			Name of Data Array where
	DA_Byte_Name		data is to be stored in the		Data Array 2 name
			FieldServer.
	DA_Byte_offset		Starting location in Data		0
			Array.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com