5.2 Server Side Connections
Section Title |
|
|
Connections |
|
|
Column Title | Function | Legal Values |
Port | Specify which port the device is | FS x40: |
| connected to the FieldServer | FS x20: |
Baud* | Specify baud rate | 110 – 115200, standard baud rates |
|
| only |
Parity* | Specify parity | Even, Odd, None, Mark, Space |
Data_Bits* | Specify data bits | 7, 8 |
|
|
|
Stop_Bits* | Specify stop bits | 1 |
|
|
|
Protocol | Specify protocol used | Canatal |
|
|
|
Handshaking* | Specify hardware handshaking | RTS, RTS/CTS, None |
The FieldServer is capable of handling any of the above connection specification but the Canatal Corporation Inc. devices are support the specification provided in the example below.
Example
//Server Side Connections
Connections |
|
|
|
| |
Port, | Baud, | Parity, | Protocol, | Data_bits, Stop_bits, | |
R1, | 1200, | Even, | Canatal, | 7, | 1, |
5.3 Server Side Nodes
Section Title |
|
|
Nodes |
|
|
Column Title | Function | Legal Values |
Node_Name | Provide name for node | Up to 32 alphanumeric characters |
Node_ID | Address of physical server node | |
| (Canatal device address) |
|
Protocol | Specify protocol used | Canatal, Satchnet |
Example
//Server Side Nodes
Nodes
Node_Name, Node_ID, Protocol
FieldServer, 11, Canatal
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 (408)
Visit our website: www.fieldserver.com
Page 9