FieldServer FS-8700-59 Error. Poll%d/Response%d Stns Not Equal, CANA#15, Version Control

Page 17

FS-8700-59 Canatal Sachnet

Driver Manual

Errors 8 - 12 are produced when parsing a response from a Canatal device. They may result from a corrupted message. If they occur infrequently then they require no attention. Check the communication stats. In fact, it is more likely that you will be alerted to them by seeing errors in the communication statistics.

CANA:#8

Error. Poll(%d)/Response(%d) Stns Not Equal

 

The station polled has response but as a different station. The response will be

 

abandoned. This may mean that the device's address has been incorrectly set or

 

that the device is not functioning correctly.

CANA:#9

Error. Poll(%d)/Response(%d) Tables Not Equal

CANA:#10

Error. Response Table=%d Unknown

CANA:#11

Error. Poll(%d)/Response(%d) Address Not Equal

CANA:#12

Error. Response Expected(%d)/Actual(%d) Bytes

CANA:#13

Error. Array is too small for mapDesc=<%s>

 

Some data will not be stored.

This is regarded as an error as the map descriptor has requested more data than can be stored. The excess data has been discarded. The user should modify the map descriptor definition or change the array length in the CSV file and restart the FieldServer.

CANA:#14

Error. Unknown Data method (%d) for mapDesc=<%s>

 

Report this error to FIELDSERVER TECHNOLOGIES.

CANA:#15

Error. Unknown Data method (%d) for mapDesc=<%s>

 

Report this error to FIELDSERVER TECHNOLOGIES.

7.Version Control

Date

Driver

Document

Responsible

Comment

 

Version

Revision

 

 

 

 

 

 

 

 

1.00a

0

 

Initial Release

 

1.00b

1

 

Minor changes in the way offset was described

 

 

 

 

in the examples in section 4.4.4 and 5.4.4

 

 

 

 

 

 

 

 

 

Driver changes are described in Technical

 

 

 

 

Bulletin TB0001.

5Apr2002

1.00b

2

 

Corrected some table numbers in section 6.1.

 

 

 

 

Previously table 16 & 17 had been shown as

 

 

 

 

table 15 & 16.

11/22/02

1.00b

3

MF

Formatting changes

3/13/03

1.00b

4

JD

Formatting changes

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 (408) 262-2299 fax: (408) 262-9042

Visit our website: www.fieldserver.com E-mail: support@fieldserver.com

Page 15

Image 17 Contents
FS-8700-59 Canatal Satchnet Driver Table of Contents RS-485 connection adapter Driver Manual Supplied by FieldServer Technologies for this driverProvided by user Canatal Device UTP or similar cable with RJ11 adapterHardware Connections Interconnecting Cable CharacteristicsColumn Title Function Legal Values Data ArraysClient Side Nodes Client Side ConnectionsFieldServer Specific Map Descriptor Parameters Client Side Map DescriptorsDriver Specific Map Descriptor Parameters Timing ParametersDEV23COOL Anaout Map Descriptor ExampleTBL05DATA ,0 Rdbc , DEV11 Data Arrays Server Side Nodes Server Side ConnectionsServer Side Map Descriptors DEV11TBL5 Canatal Device Data Tables Driver NotesSeries Data Format Max Read Description Troubleshooting Error. Poll%d/Response%d Tables Not Equal Error. Poll%d/Response%d Stns Not EqualThat the device is not functioning correctly CANA#15