Maxtor 100462887 manual Typical current profiles, Conducted noise, Voltage tolerance

Page 20

2.8.1.1Typical current profiles

Figure 1. Typical 5V startup and operation current profile

Figure 2. Typical 12V startup and operation current profile

2.8.2Conducted noise

Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load on the +12 volt line or an equivalent 15-ohm resistive load on the +5 volt line.

•Using 12-volt power, the drive is expected to operate with a maximum of 120 mV peak-to-peak square-wave injected noise at up to 10 MHz.

•Using 5-volt power, the drive is expected to operate with a maximum of 100 mV peak-to-peak square-wave injected noise at up to 10 MHz.

Note. Equivalent resistance is calculated by dividing the nominal voltage by the typical RMS read/write current.

2.8.3Voltage tolerance

Voltage tolerance (including noise):

5V ± 5%

12V ± 10%

12	DiamondMax 20 Serial ATA Product Manual, Rev. A

Image 20

Contents Sata Page DiamondMax 20 Serial ATA Product Manual, Rev. a DiamondMax 20 Serial ATA Product Manual, Rev. a Contents DiamondMax 20 Serial ATA Product Manual, Rev. a List of Figures Page Introduction About the Serial ATA interface Drive specifications Specification summary tablesDrive specifications summary for 160 Gbyte models Drive specification STM3160811AS STM3160211ASYes Drive specifications summary for 80 and 40 Gbyte models Drive specification STM380811AS STM380211AS STM340211ASDiamondMax 20 Serial ATA Product Manual, Rev. a Default logical geometry LBA modeFormatted capacity Cylinders Read/write heads Sectors per track 16,383Physical characteristics Recording and interface technologyTypical seek times msec Read Write Seek timeStart/stop times Power specifications Voltage tolerance Typical current profilesConducted noise Power-management modes Active modeIdle mode Sleep modeEnvironmental specifications Acoustics VibrationOperating vibration Nonoperating vibrationElectromagnetic immunity ReliabilityRadio frequency environments Test Description Performance level Reference standardSafety certification Agency certificationElectromagnetic compatibility Korean RRLEuropean Union Restriction of Hazardous Substances RoHS Environmental protectionFCC verification Corrosive environment DiamondMax 20 Serial ATA Product Manual, Rev. a Configuring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsMounting dimensions-top, side and end view Drive mountingDiamondMax 20 Serial ATA Product Manual, Rev. a Serial ATA Sata interface Hot-Plug compatibilitySerial ATA device plug connector pin definitions Serial ATA connector pin definitionsSignal Pin Function DefinitionCommand name Command code in hex Supported ATA commandsSupported ATA commands F4H Identify Device command Word Description ValueXx07H Description if bit is set to Bit Word Bit WordSet Features command Set Features command valuesCode in features register A.R.T. command 3 S.M.A.R.T. commandsA.R.T. commands DiamondMax 20 Serial ATA Product Manual, Rev. a Maxtor support services DiamondMax 20 Serial ATA Product Manual, Rev. a Index RRL Sata DiamondMax 20 Serial ATA Product Manual, Rev. a Page Maxtor Corporation

100462887 specifications

The Maxtor 100462887 is a noteworthy hard drive that has made its mark in the storage category, particularly for users requiring reliable and spacious data storage solutions. With a capacity of 100GB, this hard drive presents a solid option for individuals and small businesses looking to manage substantial amounts of information, from documents to multimedia files.

One of the key features of the Maxtor 100462887 is its 7200 RPM spindle speed, which allows for quick data access and transfer rates. This speed greatly enhances the overall performance of the hard drive, making it suitable for scenarios where rapid data retrieval is critical, such as gaming, video editing, and running intensive applications. Coupled with its Ultra ATA/133 interface, the drive can support high-speed data transfers, significantly improving the user experience.

The Maxtor 100462887 employs advanced data storage technologies aimed at providing users with not only speed but also reliability. One such technology is the use of an advanced caching mechanism, which allows for efficient management of frequently accessed data. This results in reduced latency and improved performance, especially when the drive is engaged with multiple read and write operations simultaneously.

In terms of physical characteristics, the Maxtor 100462887 is designed to fit seamlessly into a standard 3.5-inch drive bay, making it compatible with most desktop systems. Its robust build ensures durability, which is essential considering the critical role that hard drives play in data storage and retrieval. Additionally, this hard drive includes built-in shock protection against incidental impacts, thereby safeguarding your data from potential damage.

Energy efficiency is also a priority for the Maxtor 100462887, as it operates with a relatively low power consumption, making it an environmentally friendly choice. This efficiency not only helps conserve energy but also minimizes heat generation, leading to extended life expectancy of the drive.

Given its blend of performance, reliability, and efficiency, the Maxtor 100462887 serves as an excellent choice for users seeking a dependable hard drive that meets their data storage needs, whether for personal use, home entertainment systems, or small scale business operations.