Maxtor 100462887 manual Configuring the drive, Serial ATA cables and connectors

Page 30

3.2Configuring the drive

Each drive on the Serial ATA interface connects point-to-point with the Serial ATA host adapter. There is no master/slave relationship because each drive is considered a master in a point-to-point relationship. If two drives are attached on one Serial ATA host adapter, the host operating system views the two devices as if they were both “masters” on two separate ports. Both drives behave as if they are Device 0 (master) devices.

Serial ATA drives are designed for easy installation. It is usually not necessary to set any jumpers on the drive for proper operation; however, if you connect the drive and receive a “drive not detected” error, your SATA- equipped motherboard or host adapter may use a chipset that does not support SATA speed autonegotiation. If you have a motherboard or host adapter that does not support autonegotiation:

Configure the jumper block with a jumper as shown in Figure 3 below to limit the data transfer rate to 1.5 Gbits per second (and leave the drive connected to the SATA-equipped motherboard or host adapter that doesn’t support autonegotiation) or

Install a SATA host adapter that supports autonegotiation, set the drive jumper block to “3 Gbits per second operation” (see Figure 3 below), and connect the drive to that adapter. This option has the benefit of not limiting the drive to a 1.5 Gbits/sec transfer rate.

3.0 Gbits per second operation

Limit data transfer rate to 1.5 Gbits per second

Jumper block

SATA power connector

SATA interface connector

Figure 3. Serial ATA connectors and jumper options

3.3Serial ATA cables and connectors

The Serial ATA interface cable consists of four conductors in two differential pairs, plus three ground connec- tions. The cable size may be 30 to 26 AWG with a maximum length of one meter (39.37 inches). See Table 6 for connector pin definitions. Either end of the SATA signal cable can be attached to the drive or host.

For direct backplane connection, the drive connectors are inserted directly into the host receptacle. The drive and the host receptacle incorporate features that enable the direct connection to be hot pluggable and blind mateable.

For installations which require cables, you can connect the drive as illustrated in Figure 4.

Signal connector

Power connector

Signal cable

Power cable

Figure 4. Attaching SATA cabling

Each cable is keyed to ensure correct orientation. DiamondMax 20 Serial ATA drives support latching SATA connectors.

22

DiamondMax 20 Serial ATA Product Manual, Rev. A

Image 30
Contents Sata Page DiamondMax 20 Serial ATA Product Manual, Rev. a DiamondMax 20 Serial ATA Product Manual, Rev. a Contents DiamondMax 20 Serial ATA Product Manual, Rev. a List of Figures Page Introduction About the Serial ATA interface Drive specifications Specification summary tablesDrive specifications summary for 160 Gbyte models Drive specification STM3160811AS STM3160211ASYes Drive specifications summary for 80 and 40 Gbyte models Drive specification STM380811AS STM380211AS STM340211ASDiamondMax 20 Serial ATA Product Manual, Rev. a Formatted capacity Default logical geometryLBA mode Cylinders Read/write heads Sectors per track 16,383Physical characteristics Recording and interface technologySeek time Start/stop timesTypical seek times msec Read Write Power specifications Typical current profiles Conducted noiseVoltage tolerance Idle mode Power-management modesActive mode Sleep modeEnvironmental specifications Operating vibration AcousticsVibration Nonoperating vibrationRadio frequency environments Electromagnetic immunityReliability Test Description Performance level Reference standardElectromagnetic compatibility Safety certificationAgency certification Korean RRLEnvironmental protection FCC verificationEuropean Union Restriction of Hazardous Substances RoHS Corrosive environment DiamondMax 20 Serial ATA Product Manual, Rev. a Configuring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsMounting dimensions-top, side and end view Drive mountingDiamondMax 20 Serial ATA Product Manual, Rev. a Serial ATA Sata interface Hot-Plug compatibilitySignal Serial ATA device plug connector pin definitionsSerial ATA connector pin definitions Pin Function DefinitionSupported ATA commands Supported ATA commandsCommand name Command code in hex F4H Identify Device command Word Description ValueXx07H Description if bit is set to Bit Word Bit WordSet Features command Set Features command values3 S.M.A.R.T. commands A.R.T. commandsCode in features register A.R.T. command DiamondMax 20 Serial ATA Product Manual, Rev. a Maxtor support services DiamondMax 20 Serial ATA Product Manual, Rev. a Index RRL Sata DiamondMax 20 Serial ATA Product Manual, Rev. a Page Maxtor Corporation

100462887 specifications

The Maxtor 100462887 is a noteworthy hard drive that has made its mark in the storage category, particularly for users requiring reliable and spacious data storage solutions. With a capacity of 100GB, this hard drive presents a solid option for individuals and small businesses looking to manage substantial amounts of information, from documents to multimedia files.

One of the key features of the Maxtor 100462887 is its 7200 RPM spindle speed, which allows for quick data access and transfer rates. This speed greatly enhances the overall performance of the hard drive, making it suitable for scenarios where rapid data retrieval is critical, such as gaming, video editing, and running intensive applications. Coupled with its Ultra ATA/133 interface, the drive can support high-speed data transfers, significantly improving the user experience.

The Maxtor 100462887 employs advanced data storage technologies aimed at providing users with not only speed but also reliability. One such technology is the use of an advanced caching mechanism, which allows for efficient management of frequently accessed data. This results in reduced latency and improved performance, especially when the drive is engaged with multiple read and write operations simultaneously.

In terms of physical characteristics, the Maxtor 100462887 is designed to fit seamlessly into a standard 3.5-inch drive bay, making it compatible with most desktop systems. Its robust build ensures durability, which is essential considering the critical role that hard drives play in data storage and retrieval. Additionally, this hard drive includes built-in shock protection against incidental impacts, thereby safeguarding your data from potential damage.

Energy efficiency is also a priority for the Maxtor 100462887, as it operates with a relatively low power consumption, making it an environmentally friendly choice. This efficiency not only helps conserve energy but also minimizes heat generation, leading to extended life expectancy of the drive.

Given its blend of performance, reliability, and efficiency, the Maxtor 100462887 serves as an excellent choice for users seeking a dependable hard drive that meets their data storage needs, whether for personal use, home entertainment systems, or small scale business operations.