Page 12 of 39 |
5.2.Server Side Connection Descriptors
Section Title |
|
|
|
|
| |
Adapter |
|
|
|
|
| |
Column Title |
| Function |
| Legal Values | ||
Adapter | Adapter Name |
|
| N1, N23 | ||
Protocol | Specify protocol used |
| SNMP | |||
| This | parameter | can | be |
| |
SNMP_Community* | configured if it is | required | that | Any string up to 255 characters, | ||
“Community” be a different name | Public | |||||
| ||||||
| in order to receive traps. |
|
| |||
Example |
|
|
|
|
| |
//Server Side Connections
Adapters |
|
|
Adapter, |
| Protocol |
N1, |
| SNMP |
5.3.Server Side Node Descriptors
Section Title |
|
| |
Nodes |
|
| |
Column Title | Function | Legal Values | |
Node_Name | Provide name for Node | Up to 32 alphanumeric | |
characters | |||
|
| ||
Protocol | Specify protocol used | SNMP |
Example
//Server Side Nodes
Nodes |
|
Node_Name, | Protocol |
Agent 1, | SNMP |
5.4.Server Side Map Descriptors
No Server Side Map Descriptors are required by SNMP for Get or Set requests, since the mapping of FieldServer Data Arrays into the SNMP OID addressing scheme follows the method outlined in Section 5.1 above. Server Side Map Descriptors are required to configure SNMP TRAPS as outlined in Appendix A.
Scaling on Client side is per normal model but on Server side, normal model only applies if a Map Descriptor is used.
3Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for details of the ports available on specific hardware.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 9042 Toll Free: (888) 509 1970 email: support@fieldserver.com