FieldServer FS-8704-09 SNMP FS-8704-09 Snmp Driver Manual Client Side Node Descriptors

FS-8704-09 SNMP Driver Manual Page 8 of 39

4.3.Client Side Node Descriptors

Section Title
Nodes
Column Title				Function			Legal Values
							Up	to		32
Node_Name		Provide name for Node					alphanumeric
							characters
Node_ID*		Identifies Node; needed only if Node Online/Offline					1-255
		monitoring is used.
Protocol		Specify protocol used					SNMP
Adapter		Specify network adapter					N1, N22
		IP Address of remote Agent. Refer to Appendix A.1					Legal	4	byte	IP
IP_Address							address		on	the
		for more information.					same subnet.
		Controls how MIB file is formatted. Refer to					‘Standard’;
MIB_Style							‘Custom’;
		Appendix A.3 for more info.					‘NuDesign’
MIB_Style_for_Traps		Controls how traps are reported in MIB file. Refer to					Style1;		Style2;
		Appendix A.3 for more info.					Style3
		Controls whether a Node’s traps contribute to the
		MIB file. Where duplicate traps are sent to more
		than one Node, second and subsequent Nodes will
Do_not_MIB_this_Node		not contribute to the MIB file. Review the example					0; 1
		MIB files and configuration file in Appendix A.3.
		0 – Node’s traps contribute to MIB File.
		1 – Node’s traps do not contribute to MIB file.
		If this parameter is set it is possible for the
SNMP_Read_Method*		FieldServer to sequentially read (walk) the SNMP					Walk, -
		Server in the same way as the snmpwalk parameter
		works on SNMP.
Example
// Client Side Nodes
Nodes
Node_Name,	Node_ID,		Protocol,	Adapter,	IP_Address,	SNMP_Read_Method
Agent 1,	1,		SNMP,	N1,	192.168.1.174,	Walk

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 9042 Toll Free: (888) 509 1970 email: support@fieldserver.com