Page 14 of 39 |
Appendix A.1.2. Receiving SNMP TRAPs using the SNMP Client
In order to receive Traps, the SNMP Client requires a Map Descriptor to be configured for each OID that is to be updated via a Trap. Note that a single Trap message may contain multiple OID’s, depending on the Agent originating the Trap. Each OID of interest requires its own Map Descriptor. The Map Descriptor Function must be set to Passive_Client.
Example:
// Server Side Map Descriptors |
|
|
|
| |
Map Descriptors |
|
|
|
|
|
Map_Descriptor_Name, | Data_Array_Name, | Data_Array_Offset, | Function, | Node_Name, | SNMP_OID |
A1, | DA_AI3, | 0, | Passive_Client, | Agent 1, | 1.3.6.1.4.1.6347.1.1.0, |
A2, | DA_AI3, | 1, | Passive_Client, | Agent 1, | 1.3.6.1.4.1.6347.1.1.1, |
|
|
|
|
|
|
The OID specifies the value that will be stored by this Map
Descriptor following a TRAP update.
Traps can only be received by Map Descriptors with the Function set to Passive_Client.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 9042 Toll Free: (888) 509 1970 email: support@fieldserver.com