Abit IL-90MV manual 2 DDR2 Memory Slots

2.5.2 DDR2 Memory Slots

This motherboard provides two 240-pin DIMM slots for Dual Channel DDR2 667/533 memory modules with memory expansion size up to 2GB.

※To reach the optimum performance in dual-channel configurations, install DDR DIMM pairs at the same density, DRAM technology and bus width for both slots.

To install system memory:

1.Power off the computer and unplug the AC power cord before installing or removing memory modules.

2.Locate the DIMM slot on the board.

3.Hold two edges of the DIMM module carefully, keep away of touching its connectors.

4.Align the notch key on the module with the rib on the slot.

5.Firmly press the module into the slots

until the ejector tabs at both sides of the slot automatically snaps into the mounting notch. Do not force the DIMM module in with extra force as the DIMM module only fit in one direction.

6.To remove the DIMM modules, push the two ejector tabs on the slot outward simultaneously, and then pull out the DIMM module.

※Static electricity can damage the electronic components of the computer or optional boards. Before starting these procedures, ensure that you are discharged of static electricity by touching a grounded metal object briefly.

2-12 iL-90MV