Abit IL-90MV manual On-Chip PCI Device

※The option [Enhanced Mode] does not support the Windows 98/ME operating system.

-PATA IDE Mode

This item determines the function mode for “IDE1”connector.

[IDE-1]: “IDE1” connector served as [Primary Master] and [Primary Slave] channel. The remaining “SATA1” and “SATA2” connectors are disabled.

[IDE-2]: “IDE1” connector served as [Secondary Master] and [Secondary Slave] channel. “SATA1” and “SATA2” connector served as [Primary Master] and [Primary Slave] channel.

Refer to the following table for the relationships between IDE and SATA ports.

PATA IDE	IDE Channel 1	IDE Channel 1	IDE Channel 2	IDE Channel 2
Mode	Master	Slave	Master	Slave
IDE-1	IDE Master	IDE Slave	None	None
IDE-2	SATA1	SATA2	IDE Master	IDE Slave

※This option is configurable only when the item [On-Chip SATA Controller] is set to [Combined Mode].

On-Chip PCI Device

Click <Enter> key to enter its submenu:

Phoenix – AwardBIOS CMOS Setup Utility

On-Chip PCI Device

On-Chip USB Controller		Enabled		Item Help
- USB 2.0 Controller		Enabled
- USB Keyboard Support via		OS
- USB Mouse Support via		OS
On-Chip Audio Controller		Enabled
￿￿￿￿:Move Enter:Select	+/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values	F6: Fail-Safe Defaults		F7: Optimized Defaults

On-Chip USB Controller

This option enables or disables the USB controller.

3-14 iL-90MV