IDE Channel 1 Master/Slave, IDE Channel 2 Master/Slave, IDE Channel 3 Master/Slave, IDE Channel 4 Master/Slave
Click <Enter> key to enter its submenu:
Phoenix – AwardBIOS CMOS Setup Utility
IDE Channel 1 Master
IDE HDD | Press Enter |
| Item Help | |
IDE Channel 1 Master | Auto |
|
|
|
Access Mode | Auto |
|
|
|
Capacity | 0 | MB |
|
|
Cylinder | 0 |
|
|
|
Head | 0 |
|
|
|
Precomp | 0 |
|
|
|
Landing Zone | 0 |
|
|
|
Sector | 0 |
|
|
|
|
|
| ||
:Move Enter:Select | ||||
F5: Previous Values | F6: | F7: Optimized Defaults | ||
※The items “IDE Channel 3 Master/Slave” and “IDE Channel 4 Master/Slave” appear only when the item
IDE HDD
This item allows you to detect the parameters of IDE drives by pressing <Enter> key. The parameters will be shown on the screen automatically.
IDE Channel 1 Master/Slave, IDE Channel 2 Master/Slave, Extended IDE Drive
When set to [Auto], the BIOS will automatically check what kind of IDE drive you are using. If you want to define your own drive by yourself, set it to [Manual] and make sure you fully understand the meaning of the parameters. Please refer to the instruction manual provided by the device’s manufacturer to get the setting right.
Access Mode
This item selects the mode to access your IDE devices. Leave this item to its default [Auto] setting to detect the access mode of your HDD automatically.
Capacity
This item displays the approximate capacity of the disk drive. Usually the size is slightly greater than the size of a formatted disk given by a
BIOS Setup
|