4.Peel off the protective film from the retention module. This will expose the adhesive sponge.
5.Face the retention module with the side of adhesive sponge toward the bottom side of the motherboard. Align the four screw holes from the retention module through the motherboard.
6.Peel off the protecting film that was originally attached to the bottom of CPU heatsink. This film prevents the thermal paste from being touched by anything but the CPU die, and so it has to be removed to increase the contact with the CPU die after having installed the heatsink.
Forgetting to do so may cause the CPU
※Watch out for the integrity and usability of the thermal paste each time when
|