4.3.1 Tips on HDMI application
1.Connects to your HDMI device from the connector “HDMI1” only with an
2.Connect your HDMI digital device to port “HDMI1” located at the rear I/O panel of this motherboard.
3.Select the type of display device. For “HDMI” connection, you will have to configure the BIOS parameter:
(1)Enter the BIOS Setup
Menu: “Advanced Chipset Features” “HDMI Port Display”.
(2)Change the option from the default [DVI] to [Normal].
4.After completed the driver installation of “Intel Graphics Media Accelerator”, if there is no graphics output when restarting the system, try enter Hot Keys <Ctrl> + <Alt> + <F1> simultaneously to regain.
5.For the application of HDMI digital device:
(1)Check to see if the screen resolution in the [Display Properties] is limited to “720 x 480” or lower than the one of your HDMI digital device.
Driver & Utility CD
|