ioSafe eSATA/USB 2.0 user manual Precautions

Page 7

Precautions

Please read the precautions listed below. Failure to do so may result in damage to the device, loss of data, and voiding of the warranty

If you are using the SoloPRO for primary storage (as opposed to data backup) we strongly recommend that you backup your data.

If the SoloPRO has a three-prong plug, do not plug the unit into a two- prong outlet.

Do not bump, jar or drop the SoloPRO.

Do not disconnect any cables while the SoloPRO is powered on without first stopping the device through the operating system software interface. Do not use more than one interface (e.g USB 2.0, eSATA) at a time.

7

Image 7

Contents IoSafe SoloPRO External Hard Drive eSATA/USB Contents Welcome Copyrights Page CE Compliance For Europe Precautions Package Contents Specifications Supported OS/interface connection System RequirementsAbout USB About eSATA Kensington Security Slot Securing the SoloPRO SuggestionsFor Added Security Using the USB connection Connecting the SoloPRO to Your ComputerPage ESATA Connection Connect the included power supply to the SoloPRO Page Disconnecting and Reconnecting the Drive using eSATA To change the SoloPRO formatting to work with your Mac Formatting the SoloPRO for Mac OSTerms and Conditions IoSafe Data Recovery ServicePage Following a Disaster Continue to use the ioSafe device for subsequent backups IoSafe Warranty Corporate Headquarters IoSafe Contact Information