ioSafe eSATA/USB 2.0 user manual Connect the included power supply to the SoloPRO

Page 18

3.Connect the included power supply to the SoloPRO.

CAUTION! To avoid damage to the power supply connector, make sure it is aligned correctly before plugging it into the drive. Do not move the drive while it is powered up to avoid drive damage or data loss.

a)Plug in the AC cord to the power supply.

b)Plug the small end of the power supply into the SoloPRO’s power port.

c)Plug the AC cord into an AC outlet.

4.Connect the eSATA cable from the PC to the SoloPRO.

NOTE: Never connect the drive to the computer with more than one cable.

a)Identify the eSATA cable and connect it to the back of the drive.

b)Connect the other end of the cable to your eSATA host adapter or built-in eSATA connection.

5.Turn on the power switch on the back of the SoloPRO and power-on your computer.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents IoSafe SoloPRO External Hard Drive eSATA/USB Contents Welcome Copyrights Page CE Compliance For Europe Precautions Package Contents Specifications System Requirements Supported OS/interface connectionAbout USB About eSATA Securing the SoloPRO Suggestions Kensington Security SlotFor Added Security Connecting the SoloPRO to Your Computer Using the USB connectionPage ESATA Connection Connect the included power supply to the SoloPRO Page Disconnecting and Reconnecting the Drive using eSATA Formatting the SoloPRO for Mac OS To change the SoloPRO formatting to work with your MacIoSafe Data Recovery Service Terms and ConditionsPage Following a Disaster Continue to use the ioSafe device for subsequent backups IoSafe Warranty IoSafe Contact Information Corporate Headquarters
Top Page Image Contents