PB41 Battery Eliminator

The PB41 Battery Eliminator was designed exclusively for the PB41 Printer. This device removes the need to have the battery packs in your printer. The Battery Eliminator allows the PB41 to accept power from either an AC or DC source.

A typical installation would have the PB41 Printer mounted in a vehicle and the Battery Eliminator receiving power from the ve- hicle battery.

In scenarios where portability is not required, the Battery Elimi- nator saves you from purchasing printer batteries. The Battery Eliminator removes temperature concerns when charging or us- ing your printer with battery packs.

Installing the Battery Eliminator

1Remove the battery packs from your printer.

2Install the Battery Eliminator into one of the battery pack slots.

3Connect the Battery Eliminator cable to the In-line Adapter cable (p/n: 852-052-102).

4Connect the In-line Adapter to the Truck Power Cable (p/n: 206-875-xxx). The Truck Power Cable installs to your ve- hicle battery and is routed into the cab of your vehicle.

In-line Adapter

Connects to truck power cable

Battery Eliminator

16	PB41 Printer Quick Start Guide