Intermec PB41 quick start Printer Self-Test, Determining Current Battery Power

Beep Indicator (continued)

Number of Beeps	Indicates
8 short beeps	CRC error in firmware. Redownload
	firmware.
10 short beeps	Error writing to communication con-
	troller firmware. Redownload firmware.

Determining Current Battery Power

To determine the current charge on each battery pack, print out

aself-test by pressing and holding the red self-test button for four seconds. If the battery is good, you will see the abbreviation for the word “GOOD” next to the Battery voltage (Batt1 or Batt2) print out.

This printer has a built in low battery detector. When the print- er’s battery voltage is low, the printer beeps three times, indicat- ing a Low Battery Warning. This only happens if the printer is awake.

Printer Self-Test

Push the red button and hold for about four seconds to print a self-test.

Self-Test button

The following is an explanation of the Self-Test print-out.

PB41 Printer Quick Start Guide 9