Charging Problems, Print Roller Appears Dirty

Print Roller Appears Dirty

Extended use in dirty environments and linered label printing can cause the print head to become dirty or sticky. We offer two cleaning options, a roller cleaning kit or individual cleaning cards. These are available through our Supply Sales department (1-800-255-6292).

Print is too Light

If you are not getting satisfactory darkness, connect your printer to the personal computer containing your Configuration Pro- gram and click on the Paper Options button. Adjust the Dark- ness setting to a higher percentage until the print is dark and crisp. Refer to the Intermec Portable Printers Technical Reference Manual (p/n: 978-018-001) Section 4 for more details.

Charging Problems

Using an AC Adapter

If the printer does not respond when it is connected to an AC adapter, there could be a problem with the adapter or with the wall outlet.

Note: If the battery is depleted, it may take 5-10 minutes of charging before the printer can print a self-test.

Using a Cigarette Lighter Adapter

If the printer does not respond when it is connected to a ciga- rette lighter adapter, it is possible that the fuse may be blown. To check, remove the cigarette lighter adapter from all power supplies and unscrew the cover over the pin. Pull out the fuse. If the elements in the fuse appear broken, replace the fuse.

PB41 Printer Quick Start Guide