Installing 802.11b Radio Card (if applicable)
Note: This information applies only if you have a PB41 Printer with an 802.11b Radio.
Before installing the 802.11b Radio Card ensure that the protective battery tab strips are in place or remove the batteries before installing the radio card.
Your PB41 Printer with an 802.11b radio has been configured at the factory. FCC mandates that the radio card not be installed for shipment. The following information guides you through the process of installing the radio card.
The radio card is packed separately in an
1Remove the radio card cap.
2With the logo facing down, insert the radio card between the foam and the radio card strap.
6 | PB41 Printer Quick Start Guide |