How to Use this Guide
This user’s guide gives complete instructions for installation and use of the InstantWave NWH660
Before putting the NWH660 into operation on your LAN, it is important that you adjust the unit’s settings to conform to your networking environment. This can be done with either of two tools included in the NWH660 package: the AP
AP COMFig lets you carry out basic configuration of the NWH660
Read through the next section, “Planning the Network,” to learn how to get the best possible performance from your InstantWave wireless network.
Step 1: Plan the wireless network | See “Planning the Network,” page 15, for |
| details. |
|
|
Step 2: | See “Hardware |
before installing it on an | details. |
existing Ethernet |
|
network |
|
|
|
Step 3: Install the AP on the | See “Installing the InstantWave Management |
Ethernet network | System,” page 36, for details. |
|
|
Step 4: Carry out | See “Using the InstantWave Management |
configuration and | System,” page 39, for details. |
management of the AP |
|
via IWMS |
|
|
|
14InstantWave