NDC comm NWH660 manual Dhcp, Filter

If you assign a fixed IP address to an NWH660, make sure that all NWH660s within

the same network have IP addresses on the same TCP/IP subnet.

Obtain IP from	Automatically retrieves an IP address for the NWH660
DHCP	from a Dynamic Host Configuration Protocol (DHCP)
	server. This option is enabled by default
IP Address	Manually assigns an IP address to the NWH660
Subnet Mask	Manually assigns a subnet mask to the NWH660
Default Gateway	Manually specifies the default gateway IP address (if
	required)

If you wish to change the defaults, set each AP to its new IP address before

introducing it on the running network.

Figure 12. Configuration/IP

After making any changes, click the Apply button to make the changes effective

immediately, without closing the dialog box, or click OK to accept the changes and

close the box.

Filter:

The next tab on the dialog box is Filter (Figure 13). This is a one-way protocol

filtering mechanism that prevents the AP from transmitting specified protocols from

InstantWave 11-Mbps Wireless Access Point 29