NDC comm NWH660 manual Trap Server, New/Edit Address

Page 50

		Figure 32. New/Edit Address
Two levels of access may be assigned:

	Read	Read-only rights. The user may read everything
		except the Access Control settings, but is not
		allowed to alter anything
	Read/Write	The user may read and alter all settings

Enter your PC’s IP address and then set your own access rights to Read/Write (see the following note).

Note: Do not set all the stations in the Access Control table to Read only. Once this is set and enabled, it will be impossible to modify the NWH660. Should this situation occur, press the Reset button on the rear of the NWH660 to restore the factory configuration.

To set a stations access rights, enter a station’s IP address and password (the community string is used as a password to access the NWH660) and choose Read or Read/Write.

When a setting is made, click OK. Repeat the procedure for the next PC. When all settings are made, click OK in the configuration dialog boxto make the changes effective.

Trap Server

When the NWH660 is powered on, or an Ethernet port becomes active, an event log will be generated indicating the time, the IP address of the reporting NWH660, and

50InstantWave 11-Mbps Wireless Access Point

Image 50

Contents National Datacomm Corporation MbpsUser’s Guide Technical SupportTrademarks Packing List Your NWH660 package should contain the following itemsContents Advanced Settings Figures Igure Introduction InstantWave Wireless LAN Products SnmpIwms The InstantWave Management System Automatic Discovery of InstantWave DevicesWindows 2000/XP Windows 95/98Windows NT Iwms Hardware and Software Requirements Terminology Used in this Guide Regulatory DomainSee Installing the InstantWave Management How to Use this GuideSee Hardware Pre-configuration, page 22, for See Using the InstantWave ManagementPlanning the Network Access PointWireless Computer-1 Computer-2 Infrastructure Network TypesWired Computers Server Access Point Wireless Computers Single AP NetworkSales Domain Planning an Infrastructure Network Single AP InstallationMultiple AP Installation Roaming Color Meaning LED IndicatorsHardware Description Connectors and Switches FunctionHardware Pre-configuration Installing the AP Management ToolsUsing the AP COMFig Tool AP COMFig/PasswordAP COMFig/Service AP COMFig Tool/PasswordConfiguration/General GeneralTransmission Rate AP Alias NameDomain Name Basic RatesConfiguration/Encryption EncryptionInstantWave 11-Mbps Wireless Access Point Dhcp FilterConfiguration/Filter Snmp Access Control Configuration/SNMP Access ControlPerform AP Self Diagnostic Test Upgrade AP Firmware Hardware DiagnosisReset AP Configuration InstantWave Product Placement GuidelinesInstantWave 11-Mbps Wireless Access Point Installing the InstantWave Management System Click NextImportant Issues Click Next again Figure Using the InstantWave Management System Auto-DiscoveryInstantWave Management System Configuration Popup MenuIP Configuration Next panel in the configuration dialog box is Filter Figure Wireless NameRate BroadcastTransmission ChannelMAC Access Control Identifier MAC Address List StatusAddress Click the Encryption tab to set up the security options New/Edit Address dialog box will open Figure Trap Server New/Edit AddressConfiguration/Trap Server Trap View Monitor MonitorSummary Information StatisticsMonitor/Statistics Upgrade Firmware ResetLoad Default Upgrade Firmware Manage Iwms Host Table Advanced SettingsBatch mode operation Partition the network according to the physical locationCreate Host Table via Automatic Discovery Import Host Table to check device’s availability New/Edit/Delete a Host Address on Host TableExport the Configuration profile to a File New/Edit/Delete a Host AddressImport the Configuration Profile from a File Import the Configuration Profile from a FileEncryption FAQs Question AnswerTroubleshooting Symptom Suggested SolutionsLocation of the wireless PC or AP Technical Support Support from Your Network SupplierNDC Limited Warranty HardwareLimited Warranty Service Procedures Services after Warranty Period Specifications Emission Type Firmware UpgradeTemperature Radio Frequency RangeSpain France Japan Number Frequency AppendixChannel Center MHzIndex Encryption 13, 27, 48Ssid